Ketki M Lichade,Shahrzad Shiravi,John D Finan et al.
Ketki M Lichade et al.
Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) based conductive hydrogels have been extensively used for bioelectronics and tissue engineering applications owing to their high electrical conductivity and ability to int...
Nesting and Scheduling Problems for Additive Manufacturing: A Taxonomy and Review [0.03%]
用于增材制造的嵌套与调度问题：分类和综述
Yosep Oh,Paul Witherell,Yan Lu et al.
Yosep Oh et al.
With the trends of Industry 4.0 spanning physical and virtual worlds, Additive Manufacturing (AM) has been the mainstream for realizing complex geometries designed in computers. Meanwhile, a considerable number of AM studies have focused on...
Results of an Interlaboratory Study on the Working Curve in Vat Photopolymerization II: Towards a Standardized Method [0.03%]
槽光固化工艺性能测试的室间比对研究（二）——建立标准化方法
Thomas J Kolibaba,Jason P Killgore,Benjamin W Caplins et al.
Thomas J Kolibaba et al.
The working curve measurement in photopolymer additive manufacturing is a ubiquitous measure of the cure depth of a printing resin as a function of radiant exposure of light. The fit parameters from this measurement (the depth of light pene...
Quantifying residual orientation and thermal stress contributions to birefringence in the material extrusion of polylactide [0.03%]
量化材料挤出成型中残余取向和热应力对聚乳酸双折射的贡献
Anthony P Kotula,Benjamin E Dolata,Yoontae Kim et al.
Anthony P Kotula et al.
Material extrusion is a common additive manufacturing process that subjects polymers to non-steady deformation and thermal processing to build a customized part. The mechanical properties of these parts are often worse than those of injecti...
Influence of Spectral Bandwidth on the Working Curve in Vat Photopolymerization [0.03%]
光谱带宽对桶装光固化成型工艺工作曲线的影响研究
Benjamin W Caplins,Thomas J Kolibaba,Uwe Arp et al.
Benjamin W Caplins et al.
In vat photopolymerization, 3-dimensional parts are fabricated by using patterned light to spatially cure a liquid resin. One of the foundational measurements for vat photopolymerization is known as the working curve whereby the depth (i.e....
Results of an interlaboratory study on the working curve in vat photopolymerization [0.03%]
箱外校正曲线的实验室间研究结果
Thomas J Kolibaba,Jason P Killgore,Benjamin W Caplins et al.
Thomas J Kolibaba et al.
The working curve informs resin properties and print parameters for stereolithography, digital light processing, and other photopolymer additive manufacturing (PAM) technologies. First demonstrated in 1992, the working curve measurement of ...
Upper bound of feed rates in thermoplastic material extrusion additive manufacturing☆ [0.03%]
基于热塑性材料挤出的增量制造进给速度上限研究
Cheng Luo,Xiang Wang,Kalman B Migler et al.
Cheng Luo et al.
In this work, we develop a simple model to determine the upper bound of feed rates that do not cause jamming in material extrusion additive manufacturing, also known as fused deposition modeling (FDM)™ or fused-filament fabrication (FFF). ...
Predictive modeling and optimization of multi-track processing for laser powder bed fusion of nickel alloy 625 [0.03%]
镍合金625激光粉床熔融多轨道处理的预测建模和优化
Luis E Criales,Yiğit M Arısoy,Brandon Lane et al.
Luis E Criales et al.
This paper presents an integrated physics-based and statistical modeling approach to predict temperature field and meltpool geometry in multi-track processing of laser powder bed fusion (L-PBF) of nickel 625 alloy. Multi-track laser process...
Digital light 3D printing of a polymer composite featuring robustness, self-healing, recyclability and tailorable mechanical properties [0.03%]
一种兼具坚固性、自愈性、可回收性和机械性能可调性的聚合物复合材料的数字光处理3D打印技术
Wei Huang,Jianhui Zhang,Vikaramjeet Singh et al.
Wei Huang et al.
Producing lightweight structures with high weight-specific strength and stiffness, self-healing abilities, and recyclability, is highly attractive for engineering applications such as aerospace, biomedical devices, and smart robots. Most se...
3D direct-write printing of water soluble micromoulds for high-resolution rapid prototyping [0.03%]
用于高分辨率快速制作的水溶性微模具的三维直接书写打印技术
Saja Aabith,Richard Caulfield,Omid Akhlaghi et al.
Saja Aabith et al.
Direct-write printing has contributed tremendously to additive manufacturing; in particular extrusion based printing where it has extended the range of materials for 3D printing and thus enabled use across many more sectors. The printing in...