Incorporating invalid test results in glass fracture strength determination [0.03%]
失效试验结果对玻璃强度统计特性的影响分析
Mengying Peng,Andrea Franchini,Balša Jovanović et al.
Mengying Peng et al.
Current standards suggest characterizing the distribution of glass fracture strength using co-axial double-ring standardized tests. While several international standards do not specify a minimum test number, ASTM C1499-19 recommends conduct...
Reuse potential of insulating glass units based on in-situ measurements and comparative calculations [0.03%]
基于现场测量和比较计算的隔热玻璃单元的再利用潜力
Michael Peter Mayrhofer,Philipp Kiesslich,Andreas Taras et al.
Michael Peter Mayrhofer et al.
Assessing the potential for reusing glass from existing windows and façades requires a systematic understanding of the systems, glazing assemblies, glass types, and glass dimensions that were applied over the years, as well as the requirem...
Ultra-short pulsed laser welded-and-cut glass support pillars for vacuum insulating glass [0.03%]
超短脉冲激光焊接和切割玻璃支撑柱用于真空绝缘玻璃
Tara van Abeelen,Laura-Marie Mueller,Isabell Ayvaz et al.
Tara van Abeelen et al.
Vacuum insulating glass (VIG) has demonstrated competitive Ug-values (heat transfer coefficients) which show promise to further reduce energy consumption from buildings. Support pillars are an essential part of the design as they support th...
Post-tensioning of glass beams: Analytical determination of the allowable pre-load [0.03%]
玻璃梁的后张法：允许预荷载的解析确定方法
Jagoda Cupać,Christian Louter,Alain Nussbaumer
Jagoda Cupać
The effectiveness of post-tensioning in enhancing the fracture resistance of glass beams depends on the level of compressive pre-stress introduced at the glass edge surface that will in service be exposed to tensile stresses induced by bend...
Jens Schneider,Jan Belis,Christian Louter et al.
Jens Schneider et al.
Jan Belis,Christian Louter,Jens Henrik Nielsen et al.
Jan Belis et al.