Taylor E Greenwood,Serah E Hatch,Mark B Colton et al.
Taylor E Greenwood et al.
Embedded 3D printing processes involve extruding ink within a support matrix that supports the ink throughout printing and curing. In once class of embedded 3D printing, which we refer to as "removable embedded 3D printing," curable inks ar...
Diamond-reinforced cutting tools using laser-based additive manufacturing [0.03%]
基于激光的增材制造的金刚石强化切削工具
Kellen D Traxel,Amit Bandyopadhyay
Kellen D Traxel
Production-volume and cost requirements currently limit machine tool manufacturers' ability to produce application-specific tooling with traditional methods, motivating the development of innovative manufacturing technologies. To this end, ...
Effects of laser-energy density and build orientation on the structure-property relationships in as-built Inconel 718 manufactured by laser powder bed fusion [0.03%]
激光能量密度和成型方位对选区激光熔化成形因康镍718合金组织性能关系的影响
Dillon S Watring,Jake T Benzing,Nikolas Hrabe et al.
Dillon S Watring et al.
This study investigates the effects of build orientation and laser-energy density on the pore structure, microstructure, and tensile properties of Inconel 718 manufactured by laser powder bed fusion. Three different build conditions were se...
Optimization of fused filament fabrication process parameters under uncertainty to maximize part geometry accuracy [0.03%]
基于最大部件几何精度的不确定性条件下熔融沉积制造工艺参数优化研究
Paromita Nath,Joseph D Olson,Sankaran Mahadevan et al.
Paromita Nath et al.
This work presents a novel process design optimization framework for additive manufacturing (AM) by integrating physics-informed computational simulation models with experimental observations. The proposed framework is implemented to optimi...
Alumina and tricalcium phosphate added CoCr alloy for load-bearing implants [0.03%]
添加了氧化铝和三钙磷酸盐的可用于承重假体的CoCr合金
Murat Isik,Jose D Avila,Amit Bandyopadhyay
Murat Isik
Cobalt-chromium (CoCr) alloys are used in load-bearing implants due to their excellent wear resistance. However, poor tissue-material interactions can originate due to the release of wear and corrosion-induced Co and Cr ions, motivating the...
Additive manufacturing-enabled design, manufacturing, and lifecycle performance [0.03%]
增材制造使设计，制造和生命周期性能成为可能
Tao Peng,Yi Zhu,Ming Leu et al.
Tao Peng et al.
Influence of in situ ceramic reinforcement towards tailoring titanium matrix composites using laser-based additive manufacturing [0.03%]
原位陶瓷增强体对激光基增材制造钛基复合材料的影响研究
Kellen D Traxel,Amit Bandyopadhyay
Kellen D Traxel
Increasing performance requirements of advanced components demands versatile fabrication techniques to meet application-specific needs. Composite material processing via laser-based additive manufacturing offers high processing-flexibility ...
Bonny Onuike,Amit Bandyopadhyay
Bonny Onuike
Bimetallic structures provide a unique solution to achieve site-specific functionalities and enhanced-property capabilities in engineering structures but suffer from bonding compatibility issues. Materials such as titanium alloy (Ti6Al4V) a...
Fast micron-scale 3D printing with a resonant-scanning two-photon microscope [0.03%]
使用共振扫描双光子显微镜进行快速的微米级3D打印
Benjamin W Pearre,Christos Michas,Jean-Marc Tsang et al.
Benjamin W Pearre et al.
3D printing allows rapid fabrication of complex objects from digital designs. One 3D-printing process, direct laser writing, polymerises a light-sensitive material by steering a focused laser beam through the shape of the object to be creat...
Deformations of Ti-6Al-4V additive-manufacturing-induced isotropic and anisotropic columnar structures: Insitu measurements and underlying mechanisms [0.03%]
Ti-6Al-4V添加剂制造诱导的各向同性和各向异性柱状结构的变形：原位测量和潜在机制
Jo-Chi Tseng,Wei-Chin Huang,Wei Chang et al.
Jo-Chi Tseng et al.
The deformations of isotropic and anisotropic Ti-6Al-4V columnar structures fabricated by additive manufacturing were extensively examined. The distinct texture and microstructure distributions were characterised. In situ X-ray diffraction ...