Internal Stress of Titanium-Based Nitride with Penetration Depth and Surface Roughness by sin2ψ Method Using HR-XRD [0.03%]
基于sin2ψ方法的HR-XRD渗深及表面粗糙度对钛基氮化物内应力的影响
Sungju Yoo,Eunpyo Hong,Youngkue Choi et al.
Sungju Yoo et al.
The test method for internal stress of titanium-based nitride was optimized via penetration depth and surface roughness. Through the test method, the variations in the mechanical properties due to the ratio of the carbon gradient layer were...
A Workflow for Assessing Particle Counts of Mixed Micro- and Nanoplastics in Exposed Laboratory Animals [0.03%]
暴露于混合微塑料和纳米塑料的实验动物颗粒计数的工作流程评估方法
Lauren Gaspar,Sarah Davis,Giuseppe Coppotelli et al.
Lauren Gaspar et al.
Micro- and nanoplastics (NMPs) have recently gained attention as one of the most pervasive and potentially dangerous environmental pollutants. An increasing number of studies have explored the presence and potential health consequences of N...
Application of NIR Fluorescent Materials in Imaging and Treatment of Tumors of Different Depths [0.03%]
近红外荧光材料在不同深度肿瘤的成像与治疗中的应用研究进展
Mengdi Yu,Xuan Liu,Shuqiong Wang et al.
Mengdi Yu et al.
Deep-seated tumors present significant diagnostic challenges and pose substantial mortality risks due to their occult anatomical localization. Current diagnostic paradigms predominantly depend on conventional imaging modalities; nevertheles...
Vacancy Formation and Clustering Behavior in δ-MoN: A Systematic Density Functional Theory Study [0.03%]
δ-MoN中空位形成和聚集行为的密度泛函理论系统研究
Jing Yu,Keda Wang
Jing Yu
Molybdenum nitrides are known to have a series of excellent physical properties owing to their unique bonding nature and electronic structure. However, the synthesized samples often exist in nonstoichiometric phases with structural defects ...
Sustainable Antibacterial Chitin Nanofiber/ZnO Nanohybrid Materials: Ex Situ and In Situ Synthesis, Characterization and Evaluation [0.03%]
一种可持续的抗菌材料：虾壳制备的纳米纤维素/氧化锌杂化材料及其性能研究
Caroline Piffet,Jean-Michel Thomassin,Emilie Stierlin et al.
Caroline Piffet et al.
Diseases caused by infection are a threat to human health and the world economy, with bacterial infections being responsible for a large portion of hospitalizations, morbidity, and mortality, which necessitates the quest for advanced medica...
Investigation of Annealing Temperature Effect of Tin Oxide on the Efficiency of Planar Structure Perovskite Solar Cells [0.03%]
退火温度对平面结构钙钛矿太阳电池效率的影响研究
Ahmed Hayali,Maan M Alkaisi
Ahmed Hayali
Tin oxide (SnO2) is an attractive candidate for the electron transport layer (ETL) in perovskite-based solar cells because of its low temperature process requirement. The ability to form ETL layers at low temperatures opens up opportunities...
Phase and Valence State Engineering of MOFs-Derived Iron Oxide@Carbon Polyhedrons for Advanced Microwave Absorption [0.03%]
相和价态工程调控莫来石铁氧化物@碳多面体用于高性能微波吸收
Xiaojiao Yang,Shuai Han,Hongna Xing et al.
Xiaojiao Yang et al.
MOFs-derived magnetic carbon-based composites are considered to be valuable materials for the design of high-performance microwave absorbents. Regulating phase structures and introducing mixed-valence states within the composites is a promi...
Experiment and Analysis of Termination Robustness Design for 1200 V 4H-SiC MOSFET [0.03%]
基于1200V 4H-SIC MOSFET的终端耐雪崩设计研究与分析
Mengyuan Yu,Yi Shen,Hongping Ma et al.
Mengyuan Yu et al.
This study investigates the degradation mechanisms of 1200 V SiC MOSFETs during High-temperature Reverse Bias (HTRB) reliability testing, focusing on breakdown voltage (BV) reduction. Experimental results reveal that trapped charges at the ...
Combined Experimental and DFT Study of Alumina (α-Al2O3(0001))-Supported Fe Atoms in the Limit of a Single Atom [0.03%]
单铁原子限域于氧化铝（α-Al2O3(0001)）表面的实验和理论研究
Ramazan T Magkoev,Yong Men,Reza Behjatmanesh-Ardakani et al.
Ramazan T Magkoev et al.
To probe the properties of single atoms is a challenging task, especially from the experimental standpoint, due to sensitivity limits. Nevertheless, it is sometimes possible to achieve this by making corresponding choices and adjustments to...
Development and Evaluation of a Novel Self-Etch Dental Adhesive Incorporating Graphene Oxide-Zirconia (GO-ZrO2) and Hydroxyapatite-Zinc (HA-Zn) for Enhanced Bond Strength, Biocompatibility, and Long-Term Stability [0.03%]
一种新型自酸蚀牙釉质粘合剂的开发与评估，该粘合剂结合了石墨烯氧化物-氧化锆(GO-ZrO2)和羟基磷灰石-锌(HA-Zn)，以增强附着力、生物相容性和长期稳定性
Norbert Erich Serfözö,Marioara Moldovan,Doina Prodan et al.
Norbert Erich Serfözö et al.
The aim of this study was to develop an experimental self-etch dental adhesive (SE) by synthesizing graphene oxide-functionalized zirconia (GO-ZrO2) and hydroxyapatite-functionalized zinc (HA-Zn) as inorganic powders together with bis-GMA (...