Effect of print orientation on the dimensional accuracy of three-dimensional-printed complete denture models: A comparative analysis of VAT photopolymerization and fused deposition modeling technologies [0.03%]
打印方向对三维打印完整义齿模型尺寸精度影响的研究：光聚合技术和熔融沉积技术的比较分析
Neeraj Kumar Chandraker,Gopi Naveen Chander,Rajendra Kumar Dubey
Neeraj Kumar Chandraker
Aim: To evaluate the effect of print orientation (0°, 45°, and 90°) on the dimensional accuracy, precision, and production parameters of three-dimensional (3D) printed complete denture models fabricated using VAT photo...
Accuracy of master casts fabricated for "all on 4" and "all on 6" implant situation in maxillary arch as influenced by the number of digital scan bodies: An in vitro comparative study [0.03%]
不同数量数字化扫描体对上颌“全部种植4颗”和“全部种植6颗”的最终印模精度影响的离体比较研究
Shailja Narendra Sharda,Ajay V Sabane,Rajashree D Jadhav et al.
Shailja Narendra Sharda et al.
Aim: The aim of this study was to evaluate the effect of the number of intraoral scan bodies (ISBs) on the accuracy of digital impressions and the resulting master casts in full-arch maxillary implant rehabilitations in "...
Survival rate of immediate functionally loaded ball-attachment mini-implants retaining mandibular overdentures: A systematic review [0.03%]
即刻负重球形固位小短种植体下颌覆盖义齿的生存率：系统评价
Heba M Moftah,Mohannad H Al-Saadi
Heba M Moftah
Aim: Immediate loading protocols are frequently applied when placing mini-implants (MIs), although many of these may not be functional loading. Data on immediately functionally loaded MIs are limited. Therefore, this syst...
Manish Katyayan
Manish Katyayan
Immediate complete denture rehabilitation using combined digital-functional impression technique and three-dimensional-printed occlusal templates [0.03%]
结合数字化功能印模技术和三维打印he架的即刻全口义齿修复技术
Dhitika Handa,Abhijit Ashok Patil,Ajay Sabane et al.
Dhitika Handa et al.
Integration of digital technology in prosthodontics enables precise and predictable outcomes. A hybrid digital-conventional workflow combines the accuracy of digital protocols with the reliability of traditional techniques. A 46-year-old ma...
Antimicrobial efficacy of Phoenix dactylifera-Infused three-dimensional-printed provisional dental resin against Porphyromonas gingivalis, Candida albicans, and Staphylococcus aureus: An in vitro study [0.03%]
三维打印临时牙科树脂中掺入枣椰子提取物对齿龈卟啉单胞菌、白色念珠菌和金黄色葡萄球菌的抗菌功效：一项体外研究
Jeyaraj Brintha Jei,Muthukumar Balasubramaniam
Jeyaraj Brintha Jei
Aim: This study aimed to evaluate the antimicrobial efficacy and cytocompatibility of methanolic Phoenix dactylifera seed extract incorporated into three-dimensional (3D)-printed provisional dental resin against Porphyrom...
Effect of glazed and polished 3Y-TZP and 5 mol% yttria-stabilized partially stabilized zirconia on fibroblast behavior: In vitro study [0.03%]
上釉和抛光的3Y-TZP和5mol％部分稳定的氧化锆对成纤维细胞行为的影响：体外研究
Mahima Ahuja,Umesh Y Pai,Vignesh Kamath et al.
Mahima Ahuja et al.
Aim: To evaluate and compare the viability, proliferation, and adhesion of HGFs on glazed and polished surfaces of 3 mol% yttria-stabilized tetragonal zirconia (3Y-TZP) and 5 mol% yttria-stabilized partially stabilized zi...
Evaluation of biointegration and hydrophilicity of titanium and zirconia after vacuum-assisted ultraviolet-functionalization - An in vitro study [0.03%]
真空辅助紫外线改性后的钛和氧化锆生物整合与亲水性的评估——一项体外研究
Neelima Manoj,Ahila Singaravel Chidambaranathan,Muthukumar Balasubramanium
Neelima Manoj
Aim: To evaluate the hydrophilicity and cellular response of titanium and zirconia following vacuum-assisted ultraviolet (UV) photofunctionalization using the MG-63 cell line. ...
In vitro evaluation of the dispersion of nano-polylactic acid and nano-zinc oxide fillers in denture base resins using spectroscopic modalities [0.03%]
光谱仪法评估义齿基托树脂中纳米聚乳酸和纳米氧化锌填料分散性的体外评价
Nikita Parasrampuria,N Gopi Chander,Jayanta Chattopadhyay
Nikita Parasrampuria
Aim: Polymethyl methacrylate (PMMA) is a widely used denture base material, but its mechanical and antimicrobial properties require further improvement to the diverse clinical situations. Nanoparticles such as zinc oxide ...
Comparative evaluation of fracture toughness and antifungal properties of polymethyl methacrylate and polyetheretherketone incorporated with titanium dioxide nanoparticles in different concentrations - An in vitro study [0.03%]
不同浓度的二氧化钛纳米粒子改性PMMA和PEEK材料的抗折强度及体外抗菌性能比较研究
S S Sivananda Narasimha Teja Vetsa,Peter John,Muthukumar Balasubramaniam
S S Sivananda Narasimha Teja Vetsa
Aim: This study aimed to compare and evaluate the fracture toughness and antifungal properties of polymethyl methacrylate (PMMA) and polyether etherketone (PEEK) materials incorporated with titanium dioxide nanoparticles ...