Comparative evaluation of infrasinus residual ridge height in cone-beam computed tomography and on-site measurements during indirect sinus lift osteotomy: An observational study [0.03%]
基于体层摄影与现场测量的上颌窦内提升术剩余牙槽骨高度的比较观察研究
Mallikarjuna Ragher,Sanath Kumar Shetty,Rajesh Shetty et al.
Mallikarjuna Ragher et al.
Aim: To compare infra-sinus residual ridge height measured preoperatively using Cone-Beam Computed Tomography (CBCT) with intraoperative measurements recorded during indirect sinus lift osteotomy using the Crestal Approac...
Observational Study
Journal of Indian Prosthodontic Society. 2026 Jan 1;26(1):102-110. DOI:10.4103/jips.jips_393_25 2026
Predictors of patient dissatisfaction with ceramic veneers: A matched case-control study [0.03%]
瓷贴面患者不满意的原因分析：病例对照研究
Sagar J Abichandani,Aneendita Dutta
Sagar J Abichandani
Aim: To assess the association between mock-up technique (chairside bis-acryl vs digitally fabricated 3D-printed) and shade-matching protocol (chairside visual vs laboratory-assisted/digital) with patient-initiated esthet...
Microthreaded versus smooth implant collars: A randomized trial on peri-implant inflammatory cytokines and crestal bone levels [0.03%]
微螺纹与光滑种植体颈圈的对比研究：一项关于种植体周炎性细胞因子及骨水平的随机试验
Paulina Mishra,Sapna Rani,Pankaj Dhawan et al.
Paulina Mishra et al.
Aims: To evaluate the impact of implant collar design on peri implant inflammatory biomarkers and crestal bone levels over a 6-month period. Settings and ...
Randomized Controlled Trial
Journal of Indian Prosthodontic Society. 2026 Jan 1;26(1):87-95. DOI:10.4103/jips.jips_453_25 2026
Comparative evaluation of mechanical and physical properties of provisional crown and bridge materials fabricated using milling, three-dimensional printing and conventional methods: An in vitro study [0.03%]
一种体外研究：评估用于制作临时冠桥材料的铣削、3D打印和传统方法的机械和物理性能的比较评价
Sridevi Marothi,Satyanarayana Raju Mantena,Rama Krishna Alla et al.
Sridevi Marothi et al.
Aim: To evaluate and compare the mechanical and physical properties of provisional crown and bridge materials fabricated using milling, three-dimensional (3D) printing, and conventional methods. ...
Evaluation of wear resistance in 3D printed temporary restorative material using two different printing technologies" - An in vitro study [0.03%]
一种体外研究：采用两种不同打印技术评估3D打印临时修复材料的耐磨性
Srilekha Daripalli,Mahendranadh Reddy Kareti,Y Mahadev Shastry et al.
Srilekha Daripalli et al.
Aim: This study aimed to assess and compare the wear resistance of 3D printable crown and bridge interim resin material with two different 3D printers. Se...
Comparative evaluation of mechanical properties between dual-layer and bonded three-dimensional printed denture base materials: An in vitro study [0.03%]
双层和粘接的3D打印义齿基托材料的机械性能的体外比较研究
Naveen Gopi Chander,Aryan Shivaji Deshmukh,Harini Gnana Prakash et al.
Naveen Gopi Chander et al.
Aim: The study aimed to compare the flexural strength, fracture toughness, and impact strength of the denture base materials fabricated using dual-layer and bonded 3D printing techniques. ...
Comparison of dimensional accuracy between two commercially available light-activated and chemically activated acrylic resins for verification jigs in implant prosthodontics: An in vitro study [0.03%]
一种和两种商用树脂式种植义齿验证枕的精度对比研究：一项体外实验
Lokesh Sai Karanam,Amrutha Dinesh Shenoy,Ranjith Akshay Seshadri et al.
Lokesh Sai Karanam et al.
Aim: Verification jigs play a vital role in ensuring the passive fit of implant-supported prostheses by accurately transferring implant positions to the working cast. This in vitro study aimed to compare the dimensional a...
Comparative evaluation of abutment screw loosening with two different thread lockers under cyclic loading: An in vitro study [0.03%]
两种不同螺纹紧固剂的愈合螺栓松动的体外研究比较评价
Lizy Teena Arul,Vidyashree Nandini Venugopal,Russia Marimuthu et al.
Lizy Teena Arul et al.
Aim: To evaluate and compare the effects of different thread lockers on implant abutment screw loosening. Settings and design: An in-vi...
Does resin cement choice influence the fracture strength of bonded lithium disilicate veneers? An ex vivo study [0.03%]
树脂水泥的选择会影响锂二硅酸盐贴面粘结强度吗？一项离体研究
Prathibha Mariam Thomas,Poonam Bali,Nirmal Kurian et al.
Prathibha Mariam Thomas et al.
Aim: The aim of this study was to evaluate and compare the fracture strength of ceramic veneers bonded to natural teeth using different light-cure resin cements. ...
Effect of build position on the accuracy and flexural properties of resin model materials for three-dimensional printing technologies [0.03%]
构建位置对三维打印树脂模型材料精度及弯曲性能的影响研究
Xiao-Mei Tang,Na-Yu,Bin-Ding Bai et al.
Xiao-Mei Tang et al.
Aim: This study aimed to evaluate the effects of build position (rows or columns) on the accuracy and flexural properties of three-dimensional printing resin model materials. ...