Antimicrobial efficacy of Phoenix dactylifera-Infused three-dimensional-printed provisional dental resin against Porphyromonas gingivalis, Candida albicans, and Staphylococcus aureus: An in vitro study [0.03%]
三维打印临时牙科树脂中掺入枣椰子提取物对齿龈卟啉单胞菌、白色念珠菌和金黄色葡萄球菌的抗菌功效：一项体外研究
Jeyaraj Brintha Jei,Muthukumar Balasubramaniam
Jeyaraj Brintha Jei
Aim: This study aimed to evaluate the antimicrobial efficacy and cytocompatibility of methanolic Phoenix dactylifera seed extract incorporated into three-dimensional (3D)-printed provisional dental resin against Porphyrom...
Effect of glazed and polished 3Y-TZP and 5 mol% yttria-stabilized partially stabilized zirconia on fibroblast behavior: In vitro study [0.03%]
上釉和抛光的3Y-TZP和5mol％部分稳定的氧化锆对成纤维细胞行为的影响：体外研究
Mahima Ahuja,Umesh Y Pai,Vignesh Kamath et al.
Mahima Ahuja et al.
Aim: To evaluate and compare the viability, proliferation, and adhesion of HGFs on glazed and polished surfaces of 3 mol% yttria-stabilized tetragonal zirconia (3Y-TZP) and 5 mol% yttria-stabilized partially stabilized zi...
Evaluation of biointegration and hydrophilicity of titanium and zirconia after vacuum-assisted ultraviolet-functionalization - An in vitro study [0.03%]
真空辅助紫外线改性后的钛和氧化锆生物整合与亲水性的评估——一项体外研究
Neelima Manoj,Ahila Singaravel Chidambaranathan,Muthukumar Balasubramanium
Neelima Manoj
Aim: To evaluate the hydrophilicity and cellular response of titanium and zirconia following vacuum-assisted ultraviolet (UV) photofunctionalization using the MG-63 cell line. ...
In vitro evaluation of the dispersion of nano-polylactic acid and nano-zinc oxide fillers in denture base resins using spectroscopic modalities [0.03%]
光谱仪法评估义齿基托树脂中纳米聚乳酸和纳米氧化锌填料分散性的体外评价
Nikita Parasrampuria,N Gopi Chander,Jayanta Chattopadhyay
Nikita Parasrampuria
Aim: Polymethyl methacrylate (PMMA) is a widely used denture base material, but its mechanical and antimicrobial properties require further improvement to the diverse clinical situations. Nanoparticles such as zinc oxide ...
Comparative evaluation of fracture toughness and antifungal properties of polymethyl methacrylate and polyetheretherketone incorporated with titanium dioxide nanoparticles in different concentrations - An in vitro study [0.03%]
不同浓度的二氧化钛纳米粒子改性PMMA和PEEK材料的抗折强度及体外抗菌性能比较研究
S S Sivananda Narasimha Teja Vetsa,Peter John,Muthukumar Balasubramaniam
S S Sivananda Narasimha Teja Vetsa
Aim: This study aimed to compare and evaluate the fracture toughness and antifungal properties of polymethyl methacrylate (PMMA) and polyether etherketone (PEEK) materials incorporated with titanium dioxide nanoparticles ...
Effect of photofunctionalization with and without vibration on osseointegration of titanium implants: A comparative in vitro study [0.03%]
振动存在与否下的光功能化处理对钛种植体骨结合的影响：一项体外比较研究
Priyanka Patra,Rajyalakshmi Ravuri,Praveen Mamidi et al.
Priyanka Patra et al.
Aim: Enhancing early cell-implant interaction is vital for successful osseointegration. This in vitro study aimed to evaluate the combined effect of photofunctionalization and low-frequency mechanical vibration on osteobl...
Evaluation of the effect of temporomandibular joint disorders on craniocervical posture: A cross-sectional study [0.03%]
评估颞下颌关节紊乱对颅颈姿势的影响：一项横断面研究
Sanath Kumar Shetty,Anusha Ishwarappa Katageri,Rajesh Shetty et al.
Sanath Kumar Shetty et al.
Aims: The aim of the study was to evaluate the effect of TMDs on craniocervical posture by assessing head-shoulder angle asymmetry and craniovertebral angle (CVA). ...
Comparative evaluation of marginal fit of three-dimensional-printed provisional crowns with two different build angles and layer heights using triple scan protocol: An in vitro study [0.03%]
一种体外研究：采用三重扫描协议评估两种不同构建角度和层高三维打印临时冠边缘适合度的比较分析
Harshala Prashant Manchalwar,Suryakant Deogade,Sattyam Wankhade et al.
Harshala Prashant Manchalwar et al.
Aims: This in vitro study evaluated how build angle and layer thickness affect the marginal fit of provisional crowns fabricated by digital light processing (DLP) 3D printing, an important consideration for restoration su...
Evaluation of optical, surface, and microbiological properties of computer-aided design/computer-aided manufacturing-milled and three-dimensional-printed denture bases after aging by thermocycling: An in vitro study [0.03%]
老化对计算机辅助设计/制造铣削和三维打印义齿基底光学性能、表面性能及微生物学性质的影响：体外研究
Victor Augusto Alves Bento,João Mateus Cavalaro Sayeg,Cleber Davi Del Rei Daltro Rosa et al.
Victor Augusto Alves Bento et al.
Aim: The purpose of this study was to evaluate the surface properties, optical stability, and Candida albicans adhesion to resins used in the base of conventional, milled, and three-dimensional (3D)-printed dentures after...
Effect of cathodic arc plasma spraying on shear bond strength between polyether ether ketone and maxillofacial silicone after accelerated aging - An in vitro study [0.03%]
等离子喷涂对加速老化后聚醚醚酮与义颜硅橡胶的剪切结合强度的影响：一项体外研究
Ganesh Ramkumar Rajapandi,Ahila Singaravel Chidambaranathan,Muthukumar Balasubramanium
Ganesh Ramkumar Rajapandi
Aim: To evaluate and compare the shear bond strength between polyether ether ketone (PEEK) and maxillofacial silicone after cathodic arc plasma spraying and accelerated aging. ...