Effect of Copper Addition on the Formability of 304L Austenitic Stainless Steel [0.03%]
铜添加对304L奥氏体不锈钢成形性的影响
Ali Huang,Keping Wang,Yangyang Zhao et al.
Ali Huang et al.
To improve the antibacterial properties of 304L austenitic stainless steel, copper is often added as an antibacterial agent, but the forming performance of the resulting material is poor, impacting its actual production and use. Therefore, ...
Cyanide-Free Copper-Silver Electroplated Coatings on Carbon Steel Exposed to 5% NaClO Bleacher [0.03%]
无氰镀铜-银碳钢镀层在漂白水中的腐蚀行为研究
Alfonso C Cruz,Luis S Hernández,Emmanuel J Gutiérrez
Alfonso C Cruz
This work deals with the development of cyanide-free copper-silver electroplated coatings on AISI-1075 steel and its corrosion behavior under a 5% NaClO solution (commercial household bleach). A cyanide-free bath based on sodium thiosulfate...
Small Punch Testing to Estimate the Tensile and Fracture Properties of Additively Manufactured Ti-6Al-4V [0.03%]
小型压痕试验估计激光粉末床熔融增材制造Ti-6Al-4V的拉伸和断裂性能
Enrico Lucon,Jake T Benzing,Nicholas Derimow et al.
Enrico Lucon et al.
Small punch (SP) testing is a methodology that uses tiny disks (generally 8 mm in diameter and 0.5 mm thick) to estimate mechanical properties of metallic materials, such as tensile properties, fracture toughness, and ductile-to-brittle tra...
Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review [0.03%]
金属增材制造后处理的影响：综述
Chang Ye,Chaoyi Zhang,Jingyi Zhao et al.
Chang Ye et al.
Additive manufacturing (AM) has attracted much attention due to its capability in building parts with complex geometries. Unfortunately, AM metals suffer from three major drawbacks, including high porosity, poor surface finish, and tensile ...
Axel Schumacher,Vraj Shah,Stefan Steckemetz et al.
Axel Schumacher et al.
Aim of this work is to improve the bond between a strain sensor and a device on which the strain shall be determined. As strain sensor, a CMOS-integrated chip featuring piezoresistive sensor elements was used which is capable of wireless en...
Effects of Secondary-Phase Formation on the Electrochemical Performance of a Wire Arc Additive Manufactured 420 Martensitic Stainless Steel under Different Heat Treatment Conditions [0.03%]
不同热处理条件下丝极电弧增材制造420马氏体不锈钢中第二相形成对电化学性能的影响
Salar Salahi,Mahya Ghaffari,Alireza Vahedi Nemani et al.
Salar Salahi et al.
This study aims to investigate the effects of annealing, quenching, and tempering (Q&T) heat treatments on the microstructure, crystallographic orientation, and electrochemical performance of a wall shaped 420 martensitic stainless steel pa...
J Awayes,I Reinkensmeier,G Wagner et al.
J Awayes et al.
Thermal joining can lead to high thermal stresses, undesired structural changes, and the associated loss of properties. In the turbine industry, monocrystalline materials are often used to take advantage of their high creep resistance and h...
Selected Papers from the 5th International Conference on Nanojoining and Microjoining NMJ 2020 (postponed) [0.03%]
第五届国际纳联与微联会议(NMJ 2020)(延期)精选论文集
Jolanta Janczak-Rusch
Jolanta Janczak-Rusch
Nayem Hossain,Mohammad Asaduzzaman Chowdhury,Md Bengir Ahmed Shuvho et al.
Nayem Hossain et al.
3D printing is a popular nonconventional manufacturing technique used to print 3D objects by using conventional and nonconventional materials. The application and uses of 3D printing are rapidly increasing in each dimension of the engineeri...
Low-Resistance Room-Temperature Interconnection Technique for Bonding Fine Pitch Bumps [0.03%]
一种低温低阻细间距凸点连接技术
F Roustaie,S Quednau,F Weißenborn et al.
F Roustaie et al.
In this work, we demonstrate on a new interconnection technology which can be used for bonding Flip-Chips with 5-µm-Bumps and fine pitches