Saber Azizi,Hadi Madinei,Hamed Haddad Khodaparast et al.
Saber Azizi et al.
Mass sensing using MEMS is crucial for detecting minute changes in mass with high sensitivity, enabling applications in environmental monitoring, medical diagnostics, and chemical detection. However, fluid damping in these environments is r...
Design, development and performance analysis of FSPV system for powering sustainable energy based mini micro-grid [0.03%]
一种用于可持续能源微网的FSPV系统的研制及性能分析
Sagnik Bhattacharya,Anik Goswami,Pradip Kumar Sadhu
Sagnik Bhattacharya
The Floating Solar Photovoltaic System (FSPV) is emerging as a favorable technology to policymakers for economically harvesting renewable energy. The implementation of large-scale photovoltaic (PV) systems is often disrupted due to the unav...
Assessing the electricity energy efficiency of university campus exterior lighting system and proposing energy-saving strategies for carbon emission reduction [0.03%]
高校校园外照系统电力能源效率评价及减排节能策略研究
Alper Kerem
Alper Kerem
This paper presents efficiencies research and energy-saving strategies for carbon emission reduction of the exterior lighting system of Avşar Campus of Kahramanmaraş Sütçü İmam University, Turkey. Once the campus's average energy cons...
The status and perspectives of nanostructured materials and fabrication processes for wearable piezoresistive sensors [0.03%]
用于穿戴式压阻型传感器的纳米结构材料及制造工艺现状与展望
William Chiappim,Mariana Amorim Fraga,Humber Furlan et al.
William Chiappim et al.
The wearable sensors have attracted a growing interest in different markets, including health, fitness, gaming, and entertainment, due to their outstanding characteristics of convenience, simplicity, accuracy, speed, and competitive price. ...
A water-immersible 2-axis scanning mirror microsystem for ultrasound andha photoacoustic microscopic imaging applications [0.03%]
用于超声和光声显微成像的水下双轴扫描镜微型系统
Chih-Hsien Huang,Junjie Yao,Lihong V Wang et al.
Chih-Hsien Huang et al.
Fast scanning is highly desired for both ultrasound and photoacoustic microscopic imaging, whereas the liquid environment required for acoustic propagation limits the usage of traditional microelectromechanical systems (MEMS) scanning mirro...
M Tweedie,P D Maguire
M Tweedie
We describe microfluidic fabrication results achieved using a 10.6 μm CO2 engraving laser on cast PMMA, in both raster and vector mode, with a 1.5″ lens and a High Power Density Focussing Optics lens. Raster written channels show a flatte...
External temperature sensor assisted a new low power photoplethysmography readout system for accurate measurement of the bio-signs [0.03%]
一种基于外部温度传感器的新型低功耗光电容积脉搏波描记读出系统用于准确测量生命体征信号
Rajeev Kumar Pandey,Paul C-P Chao
Rajeev Kumar Pandey
This study presents an external temperature sensor assisted a new low power, time-interleave, wide dynamic range, and low DC drift photoplethysmography (PPG) signal acquisition system to obtain the accurate measurement of various bio signs ...
Realization of novel corona virus kit using silicon based 2D photonic structure via finite difference time domain method [0.03%]
基于二维光子结构的新型冠状病毒试纸的实现及有限差分时间域法验证
Kaibalya Kuamr Sethi,Vasudevan Boobhalon,Sanjaya Kumar Sahu et al.
Kaibalya Kuamr Sethi et al.
The present research proposes the novel corona virus kit using silicon based two (2D) photonic structure. The basic principle of the estimation of different corona viruses relies on the computation of reflectance, absorbance, and transmitta...
A proposal for testing kit of corona viruses using 3D photonic structure [0.03%]
一种使用三维光子结构检测冠状病毒套装的提议
Sangram Kishore Mohanty,Subhankar Das,K P Swain et al.
Sangram Kishore Mohanty et al.
Design of corona virus testing kit is proposed in this paper using silicon based 3D photonic structure through zirconium quantum dot solution at the signal of 412 nm. The principle of measurement depends on the computation of reflectance, a...
Analysis of robust control method for the flexible manipulator in reliable operation of medical robots during COVID-19 pandemic [0.03%]
疫情期间医疗机器人可靠运行中的柔性操作器的鲁棒控制方法分析
Kuldeep Jayaswal,D K Palwalia,Subodh Kumar
Kuldeep Jayaswal
A novel coronavirus disease (COVID-19) is transmitting throughout the globe. During this Pandemic situation, medical robots are playing an important role in protecting front line medical staff from this disease. The flexible robotic manipul...