Influence of Soft Segment Length and Crosslink Density on the Properties of Thermoreversible Diels-Alder Polyurethanes [0.03%]
软段长度及交联密度对热可逆Diels-Alder聚氨酯性能的影响
Nickolaus K Weise,Gerald Camarella,Daniel F Fabrizio et al.
Nickolaus K Weise et al.
Highly crosslinked dynamic polymer networks composed of conventional polyurethane monomer starting materials modified with Diels-Alder (DA) compatible end groups are reported and shown to demonstrate beneficial properties of both thermoset ...
A process optimization and release modeling of coaxial electrospun aligned core-shell poly (ethylene oxide-poly(l-lactide-co-glycolide)) nanofibers encapsulating nerve growth factor [0.03%]
同轴静电纺聚（环氧乙烷-聚(D,L-乳酸-共-乙交酯)）纳米纤维包封神经生长因子的工艺优化及释放行为研究
Bhoomija Hariprasad,Mohammadjavad Eslamian,Nihir Patel et al.
Bhoomija Hariprasad et al.
Recent advances in neural regeneration have demonstrated the importance of incorporating proteins into polymeric capsules to provide both topographical and biochemical cues to cells. Coaxial electrospinning has emerged as a versatile techni...
Regulatory potency of oligomeric proanthocyanidins (PACs) on extrafibrillar and intrafibrillar collagen mineralization [0.03%]
寡聚原花青素(regulatory potency of oligomeric proanthocyanidins (PACs))对胶原蛋白(extrafibrillar and intrafibrillar collagen)矿化(mineralization)的调控作用
Odair Bim-Junior,Shuxi Jing,James B McAlpine et al.
Odair Bim-Junior et al.
The therapeutic potential of plant-derived proanthocyanidins (PACs) interacting with mammalian collagen is extensive, notably in strengthening specialized extracellular matrix like the dentin matrix, crucial for reparative dental treatments...
Synthesis and Characterization of Polymer-Drug Conjugates by Strain-Promoted Azide-Alkyne Cycloaddition-Mediated Polymerization [0.03%]
应变促进的叠氮化物-炔烃环加成介导聚合制备及表征聚电解质-药物缀合物
Omotola D Gbadegesin,Simeon K Adesina
Omotola D Gbadegesin
Polymer-drug conjugates (PDCs) modify the biodistribution of small-molecule anticancer agents to prevent undesired off-target adverse effects. Here, we report the preparation of two PDCs by strain-promoted [3 + 2] azide-alkyne cycloaddition...
Experimental Investigation of Regenerated Cellulose Microdialysis Probe Sterilization [0.03%]
再生纤维素微透析探针灭菌的实验研究
Swayamdipta Bhaduri,Tse-Ang Lee,Jessie Peng et al.
Swayamdipta Bhaduri et al.
Sterilization of devices is important in hospitals, operating theatres, and emergency rooms. Microdialysis allows in vivo sampling of small molecules and is used for clinical studies. Microdialysis probes are made of soft, flexible, porous ...
siRNA Delivery from Cationic Nanocarriers Prepared by Diffusion-assisted Loading in the Presence and Absence of Electrostatic Interactions [0.03%]
基于静电相互作用和非静电相互作用的阳离子纳米载体介导的siRNA递送
Olivia L Lanier,Abielle P D&#x;Andrea,Aaliyah Shodeinde et al.
Olivia L Lanier et al.
In this study, we use modified cationic nanocarriers as vehicles for the intracellular delivery of therapeutic siRNA. After developing nanocarrier formulations with appropriate pKa, size, swellability, and cytocompatibility, we investigated...
Effects of electrospun fibers containing ascorbic acid on oxidative stress reduction for cardiac tissue engineering [0.03%]
含维生素C的电纺纤维对心脏组织工程中氧化应激降低的影响研究
Ella-Louise Handley,Anthony Callanan
Ella-Louise Handley
Tissue engineering provides promise for regeneration of cardiac tissue following myocardial infarction. However, the harsh microenvironment of the infarct hampers the efficacy of regenerative therapies. Ischemia-reperfusion injury dramatica...
Porous hollow fibers with controllable structures templated from high internal phase emulsions [0.03%]
由高内相乳液模板制备的结构可控制的多孔空心纤维
Xuehui Gong,Peipei Yang,Kristen Rohm et al.
Xuehui Gong et al.
A technique to fabricate hollow fibers with porous walls via templating from high internal phase emulsions (HIPEs) has been demonstrated. This technique provides an environmentally friendly process alternative to conventional methods for ho...
Extrusion 3D printing of a multiphase collagen-based material: An optimized strategy to obtain biomimetic scaffolds with high shape fidelity [0.03%]
基于胶原蛋白的多相材料的挤出式3D打印：获得高形状保真度仿生支架的优化策略
Giorgia Montalbano,Andrea Roberto Calore,Chiara Vitale-Brovarone
Giorgia Montalbano
Extrusion printing represents one of the leading additive manufacturing techniques for tissue engineering purposes due to the possibility of achieving accurate control of the final shape and porosity of the scaffold. Despite many polymeric ...
Simple fabrication of an electrospun polystyrene microfiber filter that meets N95 filtering facepiece respirator filtration and breathability standards [0.03%]
一种简单的制备工艺：以静电纺丝聚苯乙烯微纤维滤膜实现N95口罩的过滤和呼吸性能标准要求
Madeline G Jensen,Patrick T O&#x;Shaughnessy,Marlee Shaffer et al.
Madeline G Jensen et al.
During the global spread of COVID-19, high demand and limited availability of melt-blown filtration material led to a manufacturing backlog of N95 Filtering Facepiece Respirators (FFRs). This shortfall prompted the search for alternative fi...