In vitro Comparison of Shear Bond Strength of Various Cements for Zirconia Crowns [0.03%]
几种瓷塞体粘结剂与氧化锆全冠的剪切强度比较试验研究
Sabari Murugesan
Sabari Murugesan
After cementation, specimens underwent 2000 thermal cycles (5°C to 55°C) and were tested for shear bond strength using a universal testing machine. The maximum load was recorded, and failure modes were examined under a stereomicroscope.
Evaluating Shear Bond Strength of Different Glass Ionomer Cements to Dentin: An Experimental Study [0.03%]
不同玻璃离子聚合体粘结剂与牙本质的剪切粘结强度的实验研究
Sulakshana Pradeep,Gunmeek Kaur,Bhaswati Roy et al.
Sulakshana Pradeep et al.
Aim: The study aimed to estimate the shear bond strength (SBS) of various glass ionomer cements (GICs).
Optimization of Bond Strength Between Heat-Polymerized PMMA and Contemporary CAD/CAM Framework Materials: A Comparative In Vitro Study [0.03%]
热聚PMMA与现代CAD/CAM框架材料之间结合强度的优化：一项体外比较研究
Başak Topdağı
Başak Topdağı
This study aimed to comparatively evaluate the effects of various surface treatment protocols on the shear bond strength (SBS) between heat-polymerized polymethyl methacrylate (PMMA) and different CAD/CAM framework materials, including cobalt-chromium (Co-Cr) alloys, ceramic particle-reinforced polyetheretherketone
Biocompatible Multi-functional Polymeric Material for Mineralized Tissue Adhesion [0.03%]
一种用于矿化组织粘附的生物相容性多功能聚合物材料
Yan Luo,Chenyang Zhang,Sage Fulco et al.
Yan Luo et al.
Shear bond tests demonstrated that the addition of BMEP significantly improved dentin adhesion, achieving a shear bond strength of 10.8 MPa, comparable to the commercial primer Clearfil SE Bond.
Effects of mouthwashes on the morphology, structure, and mechanical properties of orthodontic materials: a systematic review of randomized clinical studies [0.03%]
漱口水对正畸材料的形态、结构和机械性能的影响：随机对照临床试验的系统评价
Angeliki Anna Gkinosati,Miltiadis A Makrygiannakis,Eleftherios G Kaklamanos
Angeliki Anna Gkinosati
Chlorhexidine mouthrinse use did not affect the shear bond strength of polycarbonate brackets, the soldering alloys, as well as the stainless-steel bracket surfaces, but increased the roughness and friction of stainless-steel wires.
Development and Evaluation of a Novel Self-Etch Dental Adhesive Incorporating Graphene Oxide-Zirconia (GO-ZrO2) and Hydroxyapatite-Zinc (HA-Zn) for Enhanced Bond Strength, Biocompatibility, and Long-Term Stability [0.03%]
一种新型自酸蚀牙釉质粘合剂的开发与评估，该粘合剂结合了石墨烯氧化物-氧化锆(GO-ZrO2)和羟基磷灰石-锌(HA-Zn)，以增强附着力、生物相容性和长期稳定性
Norbert Erich Serfözö,Marioara Moldovan,Doina Prodan et al.
Norbert Erich Serfözö et al.
The adhesive was compared to the current gold standard adhesive Clearfill SE Bond 2 (CSE) using cytotoxicity assays, shear bond strength (SBS) tests, and resin-dentin interface analyses.
Effect of High-Power LED Barriers on Shear Bond Strength and Curing Time in Orthodontic Brackets With Single-Component Adhesive [0.03%]
高强度LED光固化灯对透明正畸托槽单组分粘接剂剪切粘结强度及固化的时效研究
Yasaman Bozorgnia,Mahla Tak,Maryam Jamali
Yasaman Bozorgnia
This study examined the impact of the cellophane layer used to cover the light guides on both the shear bond strength and the adhesive remnant index....Results: The group with the highest shear bond strength was group 5 (6 s of light curing without a cellophane layer), while group 1 (3 s of light curing with a cellophane layer) had the lowest shear bond strength.
Effect of surface treatments on the bond strength between additively manufactured or injection-molded high-performance polymers and titanium [0.03%]
表面处理对选择性激光烧结和注射成型高性能聚合物与钛结合强度的影响
Ahmet Serkan Küçükekenci,Doğu Ömür Dede,Oğuz Süleyman Özdemir et al.
Ahmet Serkan Küçükekenci et al.
Purpose: To investigate the effect of surface treatment and fabrication techniques of high-performance polymers on their shear bond strength (SBS) to grade IV titanium.
Effects of Bioactive NanoAg-ACP Microparticles on the Bond Strength of a Commercial Orthodontic Adhesive and Enamel Resistance to Demineralization [0.03%]
生物活性纳米银-ACP微粒对一种市售正畸粘接剂与牙釉质抗脱矿能力的影响
Kelton Cronquist,Linfeng Wu,Brian R Morrow et al.
Kelton Cronquist et al.
Objective: This study was to assess the effects of nanoAg-ACP microparticles as additional fillers on the shear bond strength of Phase II Dual Cure orthodontic adhesive and the enamel demineralisation of teeth using such adhesive....Results: The shear bond strength for Phase II Dual Cure and experimental adhesive was 19.06 ± 2.88 and 13.90 ± 2.22 MPa, respectively, after 24-h aging, 15.98 ± 5.44 and 15.31 ± 4.22 MPa, respectively, after 5-month aging, and 14.72 ± 3.15 and 14.46 ± 4.66 MPa, respectively, after
Enhancing Shear Bond Strength of Composite to In-Office Bleached Enamel with Biomimetic Remineralizing Agents: An In-Vitro Study [0.03%]
含仿生再矿化剂的复合材料与椅旁漂白后的牙釉质剪切 bonding 强度的体外研究
Sanjana Agarwal,Shashi Rashmi Acharya,Shubha Chhaparwal et al.
Sanjana Agarwal et al.
This in-vitro study aimed to evaluate and compare the role of remineralizing agents on the shear bond strength of composite to in-office bleached enamel using the total-etch technique....Remineralizing agents enhance the shear bond strength of composite to in-office bleached enamel using the total-etch technique. Regenerate paste (nR5 Technology) showed statistically better results than Curodont Repair paste (p11-4 peptide).
耗时 0.13236 秒，为您在
48229835
条记录里面共找到 4793 篇文章 [XML]