Effect of green tea extract antioxidant on dentin shear bond strength and resin-tag penetration depth after non-vital bleaching [0.03%]
绿茶提取物抗氧化剂对非活髓漂白后树脂连接强度及树脂标记深度的影响
Darin Safinaz,Paramita Widyandari,Ratna Meidyawati et al.
Darin Safinaz et al.
Application of 10% and 35% green tea (GT) extract as an antioxidant after 2 minutes are expected to remove free radical residues and increase dentin shear bond strength and resin tags penetration depth after non-vital bleaching.
The Influence of Erbium Laser Pretreatment on Dentin Shear Bond Strength and Bond Failure Modes: A Systematic Review and Network Meta-Analysis [0.03%]
Er：YAG激光预处理对牙本质剪切粘结强度及粘结失效方式影响的系统评价和网络 meta 分析
Jun Wang,Shuomin Chen,Yutian Wu et al.
Jun Wang et al.
Purpose: To systematically review in-vitro studies that evaluated the influence of erbium laser pretreatment on dentin shear bond strength (SBS) and bond failure modes.
Touch-cure activation by marketed universal resin luting cements of their associated primer to dentin [0.03%]
市售通用树脂粘接剂及其配套的牙本质底漆的触媒激活性能评估
Sarah Abdel-Gawad,Elisabeth Dursun,Romain Ceinos et al.
Sarah Abdel-Gawad et al.
Purpose: The aim of this study was to investigate the dentin shear bond strength (SBS) and bonding interface of three recently developed "universal" resin luting cements based on different modalities.
Dentin Bond Strength of Dental Adhesives Functionalized with Polyhedral Oligomeric Silsesquioxanes [0.03%]
功能性聚倍半硅氧烷正硅酸乙酯基底胶粘剂的牙本质粘接强度
Jana Biermann,Charlyn Elise Bień,Clemens Lechte et al.
Jana Biermann et al.
This study analyzed the dentin shear bond strength (SBS) of an etch-and-rinse (ER) or a self-etch (SE) adhesive incorporated with multifunctional polyhedral oligomeric silsesquioxanes (MA-POSS-8).
Effect of an aluminum chloride hemostatic agent on the dentin shear bond strength of a universal adhesive [0.03%]
氯化铝止血剂对通用粘接剂剪切粘接力的影响
Sujin Kim,Yoorina Choi,Sujung Park
Sujin Kim
Objectives: This study investigated the effect of an aluminum chloride hemostatic agent on the shear bond strength (SBS) of a universal adhesive to dentin. ...
Comparative evaluation of different surface treatments of the salivary contaminated dentin on the shear bond strength of self-etch adhesives: An in vitro study [0.03%]
saliva污染的牙本质使用不同表面处理方法对自酸蚀粘接剂剪切粘结强度的影响：体外实验研究
Himanshi Tehlan,Ashima Garg
Himanshi Tehlan
Aims and objectives: This study aimed to evaluate and compare the effect of different surface treatments of the salivary contaminated dentin on the shear bond strength of one-step self-etch adhesives. ...
Effect of nanosecond- and microsecond-pulse Er,Cr:YSGG laser ablation on dentin shear bond strength of universal adhesives [0.03%]
纳秒和微秒脉冲Er,Cr:YSGG激光对通用粘接剂剪切粘接力的影响
Zhengdong Xiong,Shanshan Tu,Lingling Jiang et al.
Zhengdong Xiong et al.
Objective: The study aimed to evaluate the bond strength of universal adhesives to dentin after Er,Cr:YSGG laser irradiation with nanosecond-domain and microsecond-domain pulses. ...
Influence of bonding agent application method on the dentin bond durability of a two-step adhesive utilizing a universal-adhesive-derived primer [0.03%]
一种通用粘接剂 Primer 对两步法粘接剂牙本质粘接力久期的影响研究
Shun Katsuki,Toshiki Takamizawa,Munenori Yokoyama et al.
Shun Katsuki et al.
All the factors (bonding agent application method, adhesive system, and storage condition) significantly influenced the dentin shear bond strength both with and without phosphoric acid pre-etching.
A comparative evaluation of microleakage and dentin shear bond strength of three restorative materials [0.03%]
三种修复材料的微渗漏和牙本质剪切粘结强度的比较评价
Alpana Kumari,Namita Singh
Alpana Kumari
Aim: To evaluate the microleakage and dentin shear bond strength of two glass containing restorative materials, Zirconomer and Cention N, and to compare them with a conventional glass ionomer cement (GIC) (GC Fuji II)....Following 24-h storage at 100% humidity, the dentin shear bond strength was measured and the fracture mode was determined under a stereomicroscope at 10× magnification.
The effects of different surface contaminators on the shear bond strength of a universal adhesive system to dentin: an experimental study [0.03%]
不同类型污染对通用粘结剂与牙本质剪切粘结强度影响的实验研究
Mahmoud Bahari,Siavash Savadi Oskoee,Mohammad Esmaeel Ebrahimi Chaharom et al.
Mahmoud Bahari et al.
The aim was to investigate the effects of different surface contaminators on the dentin shear bond strength (SBS) of universal adhesive system (UAS) applied in etch-and-rinse (ER) and self-etch (SE) strategies. Methods.
耗时 0.10386 秒，为您在
48229835
条记录里面共找到 59 篇文章 [XML]