High-Performance Supercapacitors with Femtosecond-Laser-Nanostructured Current Collectors [0.03%]
飞秒激光纳米结构集流体制备的高性能超级电容器
Oleksandr Kuznetsov,Fedir Ivashchyshyn,Andriy Lotnyk et al.
Oleksandr Kuznetsov et al.
The interfacial resistance between a current collector and an active material of a supercapacitor leads to energy losses and a decrease in the specific power of the device. In addition, low adhesion of the active material to the collector c...
Akshara Paras Parekh,Ashish Kumar Yadav,Brendan Whitfield et al.
Akshara Paras Parekh et al.
Designing efficient and durable nonprecious metal-based electrocatalysts for high-performance seawater splitting is essential for clean energy conversion. Nevertheless, the underlying cause of NiFeP activity, particularly in the oxygen evol...
Removal of Uranium by Polymer Metal Oxide Nanofiber Composites: Enhanced Performance through Integration of Phthalic Acid [0.03%]
基于聚合物金属氧化物纳米纤维复合材料的除铀研究：引入邻苯二酸增强性能
Sewoon Kim,Sarah K Scherrer,Nicole M Shapiro et al.
Sewoon Kim et al.
We developed polyacrylonitrile (PAN) nanofibers embedded with various commercially available metal oxide particles (Fe2O3, TiO2, MnO2, Co3O4, CoFe2O4, ZnFe2O4) via electrospinning for the removal of uranium (U-(VI)) from aqueous systems. We...
Javier Mendez Lozoya,Estrella Solis Mata,J Jesus Velazquez Salazar et al.
Javier Mendez Lozoya et al.
The development of scalable, energy-efficient carbon dioxide (CO2) capture technologies is critical for achieving net-zero emissions. Moisture swing (MS) sorbents offer a promising alternative to traditional thermal regeneration methods by ...
Femtosecond Laser Treatment of Copper Current Collectors and Their Application in Li-Ion Batteries [0.03%]
飞秒激光处理铜集流体及其在锂离子电池中的应用研究
Maciej Ratynski,Michal Krajewski,Tomas Tamulevičius et al.
Maciej Ratynski et al.
Current collectors (CCs) play an important role in enhancing the electrochemical performance of lithium-ion batteries (LiB). Research shows that increasing the surface roughness of copper foil helps improve the bonding strength between the ...
On-Demand Porous Carbon Fabrication via Selective Laser Sintering for Electrochemical Energy Storage [0.03%]
基于选择性激光烧结的多孔碳材料的快速制备及其电化学性能研究
Anthony Griffin,Muxuan Yang,Parker Frame et al.
Anthony Griffin et al.
Manufacturing structured carbon with tunable three-dimensional (3D) architectures remains a major hurdle for widescale use due to process complexity and high cost of current methods. This work demonstrates the fabrication of structured carb...
Recyclable Base-Triggered "Debond-on-Demand" Aliphatic Polyurethane Adhesives: Engineering Adhesion for Use in Inkjet Formulations [0.03%]
可回收基底触发的“按需解粘”脂肪族聚氨酯胶黏剂：用于墨水配方中粘附性的工程学研究
Matthew J Hyder,Jessica Godleman,Andrew Kyriacou et al.
Matthew J Hyder et al.
While strong polymeric adhesives are widely valued, their removal can present a significant challenge where substrate recycling is concerned. Recent advancements in "debond-on-demand" adhesives have shown promising enhancements in adhesive ...
Mixed Matrix Membranes Composed of Graphene-Based Derivatives as Additives in PVAm for CO2 Capture [0.03%]
石墨烯衍生物作为PVAM基CO2捕集膜的填料分子制备混合基质膜/MMMs
James Baker,Cristina Perinu,Maria Psarrou et al.
James Baker et al.
Graphene oxide (GO) mixed matrix membranes (MMMs) that employ facilitated transport of carbon dioxide were prepared and tested for use in postcombustion carbon capture. Two graphene hybrids were synthesized using exfoliated graphene (G) and...
Electrochemical Behavior of Saturated Potassium Nitrate Salts with Boron-Doped Diamond Electrode [0.03%]
饱和硝酸钾盐中硼掺杂金刚石电极的电化学行为
Rene Pfeifer,Ondrej Szabo,Dhananjay K Sharma et al.
Rene Pfeifer et al.
Potassium nitrate (KNO3) is widely utilized in concentrated solar power tower (CSPT) fuels and as an additive to address the issue of lithium dendrite formation in lithium-ion batteries and CSPT systems. This study investigates the influenc...
Harnessing Biofilm-Mediated Plastic Biodegradation: Innovating Smart Material Design [0.03%]
利用生物膜介导的塑料降解：创新智能材料设计
Kaitlyn Benes,Madison Liguori,Cody J Velikaneye et al.
Kaitlyn Benes et al.
The persistent environmental challenges posed by synthetic plastics, particularly petroleum-derived petropolymers, such as polyethylene (PE), polypropylene (PP), and polystyrene (PS), have intensified the need for innovative recycling metho...