Graphene Oxide Membranes for Sustainable Recycling: Poly(styrene) Fractionation by Organic Solvent Nanofiltration [0.03%]
用于可持续回收的石墨烯氧化物膜：有机溶剂纳滤法分离聚苯乙烯馏分
Natechanok Yutthasaksunthorn,Yuchen Chang,Van Son Nguyen et al.
Natechanok Yutthasaksunthorn et al.
Efficient separation and purification of polymeric mixtures is an important challenge in plastic recycling. Here we demonstrate a robust graphene oxide (GO) membrane platform capable of separating low- and high-molecular-weight poly-(styren...
Intrinsic Kinetics of Polyethylene Terephthalate Pyrolysis via Micropyrolysis and Multivariate Chromatographic Analysis [0.03%]
微解聚和多维色谱分析研究聚对苯二甲酸乙二醇酯热解的固有动力学规律
Barbara Alejandra Perez,Hilal Ezgi Toraman
Barbara Alejandra Perez
This study provides an in-depth investigation of the primary decomposition of polyethylene terephthalate (PET) via pyrolysis, employing an experimental-analytic workflow that integrates design of experiments (DoE), micropyrolysis coupled wi...
Anchoring CFD Models to Real-World Bubble Columns Using Wall Pressure Fluctuations [0.03%]
基于壁面压力波动的CFD模型标定及其在真实工业气液混合体系中的应用研究
Rupak Kumar,Vivek V Ranade
Rupak Kumar
Bubble column reactors (BCRs) are widely used in chemical and other allied industries. Computational fluid dynamics (CFD) models are often used to simulate and optimize BCRs. However, these models still require ad hoc adjustments of model p...
Predictive Chemical Kinetic Modeling: Where We Succeed, Where We Struggle, and What Comes Next [0.03%]
预测化学动力学建模的成功之处、面临的挑战以及未来方向
Alon Grinberg Dana,Kevin M Van Geem,Carlo Cavallotti et al.
Alon Grinberg Dana et al.
Chemical kinetic modeling plays a foundational role in fields ranging from energy to environmental science, pharmaceuticals, and advanced materials. The past two decades have seen remarkable progress, particularly in modeling gas-phase reac...
Optical Coherence Tomography Velocimetry for In-Line Processing: The Spherical-to-Wormlike Micelle Transition [0.03%]
用于在线处理的光学相干断层扫描测速法：球形至线状聚合物胶束的转变
Owen Watts Moore,Thomas Andrew Waigh,Philip Martin et al.
Owen Watts Moore et al.
Personal care products are often dynamically formulated in situ. Variations in the chemistry of the base components (e.g., their polydispersities or ionic contents) require extensive off-line rheological analysis to ensure the products meet...
Holistic, Literature-Informed Critical Mineral Life Cycle Assessment Guidelines: An Essential Foundation for the Energy Transition [0.03%]
整体的、基于文献的关键矿物生命周期评估指南：能源转型的基础保障
Jenna N Trost,Jennifer B Dunn,Kimberly R Marion Suiseeya
Jenna N Trost
In this paper, we demonstrate that life cycle assessment (LCA) is a valuable tool for evaluating the trade-offs between critical mineral acquisition and its resulting environmental impacts, but the applications of LCA to critical mineral mi...
Optimizing Mixtures of Metal-Organic Frameworks for Robust and Bespoke Passive Atmospheric Water Harvesting [0.03%]
用于稳健的定制型被动式大气水采集的金属有机框架混合物的优化
Charles Harriman,Qia Ke,Thijs J H Vlugt et al.
Charles Harriman et al.
Atmospheric water harvesting (AWH) is a method to obtain clean water in remote or underdeveloped regions including, but not limited to, those with an arid or desert climate. For passive (i.e., relying on ambient cooling and, for heating, na...
The Influence of Mesopore Architecture in Hierarchical H‑ZSM‑5 on n‑Butanol Dehydration [0.03%]
hierarchical H-ZSM-5介观孔道结构对正丁醇脱水反应的影响研究
Phebe Lemaire,Arno de Reviere,Dhanjay Sharma et al.
Phebe Lemaire et al.
Zeolites are among the most widely employed catalysts in the (petro-)-chemical industry. However, due to their elaborate microporous network, they are prone to diffusion limitations and deactivation. Several modification methods have been p...
Deciphering and Mitigating Failure Mechanisms in Poly(ether Imide) Corrosion Protection Coatings for Automotive Light-Weighting [0.03%]
用于汽车轻量化的聚醚酰亚胺防腐涂层的失效机理分析及缓解方法研究
Tiffany E Sill,Joseph K Cantrell,Victor Ponce et al.
Tiffany E Sill et al.
Corrosion represents a key impediment to the greater adoption of light metal alloys as alternatives to automotive steels in vehicular applications. Thin nanocomposite coatings generate considerable interest for their potential in aluminum a...
Process and Formulation Parameters Governing Polymeric Microparticle Formation via Sequential NanoPrecipitation (SNaP) [0.03%]
Sequential NanoPrecipitation(SNaP)技术制备聚合物微粒的过程及工艺参数研究
Parker K Lewis,Nouha El Amri,Erica E Burnham et al.
Parker K Lewis et al.
Polymeric microparticles (MPs) are valuable drug delivery vehicles for extended-release applications, but current manufacturing techniques present significant challenges in balancing size control with scalability. Industrial synthesis proce...