A novel etching technique for surface treatment of zirconia ceramics to improve adhesion of resin-based luting cements [0.03%]
一种新型蚀刻技术用于改善树脂基粘接剂与氧化锆陶瓷结合力的表面处理方法
Eystein Ivar Ruyter,Nalini Vajeeston,Torbjørn Knarvang et al.
Eystein Ivar Ruyter et al.
Objectives: Bonding of zirconia crowns and bridges to abutments is important, not only bonding of the thin resin layer to the abutment, but also bonding to the zirconia ceramic is crucial. Both mechanical and chemical adhesion are desired. ...
Influence of dentin pretreatment on bond strength of universal adhesives [0.03%]
牙本质预处理对通用型粘结剂粘结强度影响的研究
Claudio Poggio,Riccardo Beltrami,Marco Colombo et al.
Claudio Poggio et al.
Objective: The purpose of the present study was to compare bond strength of different universal adhesives under three different testing conditions: when no pretreatment was applied, after 37% phosphoric acid etching and after glycine applic...
Effect of curing and silanizing on composite repair bond strength using an improved micro-tensile test method [0.03%]
改良的微拉伸试验法观测固化和硅烷化对树脂修复体粘接强度的影响
Sigfus Thor Eliasson,Jon E Dahl
Sigfus Thor Eliasson
Objectives: To evaluate the micro-tensile repair bond strength between aged and new composite, using silane and adhesives that were cured or left uncured when new composite was placed. Methods: Eighty Filtek Supreme XLT composite blocks and...
The effect of grinding and/or airborne-particle abrasion on the bond strength between zirconia and veneering porcelain: a systematic review [0.03%]
关于二氧化锆与饰面瓷之间的粘接力：磨光和/或气流喷砂的影响的系统综述
Karin Lundberg,Lindsey Wu,Evaggelia Papia
Karin Lundberg
Objective: The aim of the study was to make an inventory of current literature on the bond strength between zirconia and veneering porcelain after surface treatment of zirconia by grinding with diamond bur and/or with airborne-particle abra...
The combined effect of food-simulating solutions, brushing and staining on color stability of composite resins [0.03%]
模拟食物溶液、刷牙和着色对复合树脂颜色稳定性联合影响的研究
Tânia Mara Da Silva,Ana Luísa Leme Simões Sales,Cesar Rogerio Pucci et al.
Tânia Mara Da Silva et al.
Objective: This study evaluated the effect of food-simulating media associated with brushing and coffee staining on color stability of different composite resins. Materials and methods: Eighty specimens were prepared for each composite: Gra...
The effect of gelatinase production of Enterococcus faecalis on adhesion to dentin after irrigation with various endodontic irrigants [0.03%]
各种根管冲洗液冲洗后的不同浓度溶菌酶对牙本质表面的吸附及其对粪肠球菌明胶酶生成的影响
Mehmet Burak Guneser,Ayce Unverdi Eldeniz
Mehmet Burak Guneser
Objectives: The aim of this study was to evaluate whether the gelatinase production ability of Enterococcus faecalis provides any advantage on adhesion of this bacterium to dentin treated with various irrigants and their combinations. Mater...
Influence of niobium pentoxide addition on the properties of glass ionomer cements [0.03%]
五氧化二铌添加剂对玻璃离子水泥性能的影响
Isadora Martini Garcia,Vicente Castelo Branco Leitune,Gabriela De Souza Balbinot et al.
Isadora Martini Garcia et al.
Objective: To determine the influence of niobium pentoxide (Nb2O5) addition on the physical and chemical properties of glass ionomer cements (GICs). Materials and methods: Five, 10 or 20 wt.% of Nb2O5 were incorporated into commercial GICs ...
The influence of particle size and curing conditions on testing mineral trioxide aggregate cement [0.03%]
影响值入型矿物三氧化物凝聚体试测试的因素：粒子大小及固化条件的影响
William Nguyen Ha,Bill Kahler,Laurence James Walsh
William Nguyen Ha
Objectives: To assess the effects on curing conditions (dry versus submerged curing) and particle size on the compressive strength (CS) and flexural strength (FS) of set MTA cement. Materials and methods: Two different Portland cements were...
Eliane de Lima,Ricardo Santos,Márcia Durão et al.
Eliane de Lima et al.
Objective: The aim of the present study was to assess the bond strength of universal cements cured either dually or chemically only. Methods: Three cements were assessed using different types of application: dual activated (DA) or chemicall...
Fracture behavior of single-structure fiber-reinforced composite restorations [0.03%]
单结构纤维增强复合体修复材料的断裂行为
Kohji Nagata,Sufyan K Garoushi,Pekka K Vallittu et al.
Kohji Nagata et al.
Objective: The applications of single-structure fiber-reinforced composite (FRC) in restorative dentistry have not been well reported. This study aimed to clarify the static mechanical properties of anterior crown restorations prepared usin...