Influence of Polymeric Microparticle Size and Loading Concentration on 3D Printing Accuracy and Degradation Behavior of Composite Scaffolds [0.03%]
聚合物微粒尺寸和负载浓度对复合支架三维打印精度及降解行为的影响研究
Gerry L Koons,Panayiotis D Kontoyiannis,Luis Diaz-Gomez et al.
Gerry L Koons et al.
Successful employment of 3D printing for delivery of therapeutic biomolecules requires protection of their bioactivity on exposure to potentially inactivating conditions. Although intermediary encapsulation of the biomolecules in polymeric ...
The Roles of Microprobe in Localized Electrodeposition: Electrolyte Localized Transport and Force-Displacement Sensitivity [0.03%]
微电极局部电沉积过程中的微探针作用：电解液的局部输运与力位移敏感性研究
Wanfei Ren,Manfei Wang,Xiaoqing Sun et al.
Wanfei Ren et al.
Facing the rapid development of 6G communication, long-wave infrared metasurface and biomimetic microfluidics, the performance requirements for microsystems based on metal tiny structures are gradually increasing. As one of powerful methods...
Soft Self-Regulating Heating Elements for Thermoplastic Elastomer-Based Electronic Skin Applications [0.03%]
适用于热塑性弹性体电子皮肤的软自调节加热元件
Antonia Georgopoulou,Pascal Diethelm,Marius Wagner et al.
Antonia Georgopoulou et al.
Resistive heating elements can be of particular interest for many applications, such as e-skin. In this study, soft heating elements were developed by combining thermoplastic polyurethane (TPU) with carbon black. In contrast to previous stu...
Optimizing Luminous Transmittance of a Three-Dimensional-Printed Fixed Bed Photobioreactor [0.03%]
基于三维打印固定床的光生物反应器的透射光优化研究
Kai Scherer,Adrian Huwer,Roland Ulber et al.
Kai Scherer et al.
The development of innovative production processes and the optimization of photobioreactors play an important role in generating industrial competitive production technologies for phototrophic biofilms. With emerse photobioreactors a techno...
Synthesis and Investigation of Mechanical Properties of the Acrylonitrile Butadiene Styrene Fiber Composites Using Fused Deposition Modeling [0.03%]
基于熔融沉积成型的ABS纤维复合材料的制备及力学性能研究
Ali Zahid,Muhammad Tuoqeer Anwar,Arslan Ahmed et al.
Ali Zahid et al.
Additive manufacturing is becoming a global phenomenon due to its versatile properties and numerous benefits, which is not possible by conventional machining processes. Fused deposition modeling (FDM) shows a huge potential of shift from ra...
Investigating the Mechanical Properties of Polymer Samples from Different Additive Manufacturing Processes Using Ultrasonic Phase Spectroscopy [0.03%]
基于超声相位光谱的增材制造工艺对聚合物样品力学性能的影响研究
Philipp Eyer,Sarah Enzler,Anna Trauth et al.
Philipp Eyer et al.
Additive manufacturing processes have recently been used more frequently since they offer high design freedom and easy individualization of components. The processes have been optimized to improve mechanical performance of the manufactured ...
Morphological Integrated Preparation Method and Implementation of Inorganic/Organic Dual-Phase Composite Gradient Bionic Bone Scaffold [0.03%]
无机/有机双相复合梯度仿生骨支架的形貌集成制备方法及实现
Haiguang Zhang,Yuping Wang,Qingxi Hu et al.
Haiguang Zhang et al.
Large bone defects caused by congenital deformities and acquired accidents are increasing day by day. A large number of patients mainly rely on artificial bone for repair. However, artificial bone cannot fully imitate the structure and comp...
Optimization of a High Internal Phase Emulsion-Based Resin for Use in Commercial Vat Photopolymerization Additive Manufacturing [0.03%]
基于高内相乳液树脂的商用体积光聚合成型增材制造优化
Nihan Sengokmen Ozsoz,Samand Pashneh-Tala,Frederik Claeyssens
Nihan Sengokmen Ozsoz
High internal phase emulsions (HIPEs) are potential stereolithography-based resins for producing innovative lightweight porous materials; however, the use of these resins has only been shown in bespoke stereolithography setups. These studie...
Nondestructive Assessment of Quality Characteristics of As-Built Additive Manufacturing Aeronautical AlSi10Mg and Inspection of Offset [0.03%]
基于增材制造的航空AlSi10Mg零件的质量特性无损评估及偏置检测
Pengcheng Ding,Zhiwei Zeng
Pengcheng Ding
AlSi10Mg is widely used in additively manufacturing aeronautical lattice and honeycomb structures. The unclear complex quality characteristics has been an obstacle of nondestructive testing of additive manufacturing (AM) AlSi10Mg, especiall...
Crack Formation and Control in an AlCoCrFeNi High Entropy Alloy Fabricated by Selective Laser Melting [0.03%]
选择性激光熔化制备的AlCoCrFeNi高熵合金中的裂纹形成与控制
Shuimiao Wei,Pan Ma,Yacheng Fang et al.
Shuimiao Wei et al.
The equiatomic AlCoCrFeNi high entropy alloy (HEA) is prone to cracking during the additive manufacturing process due to the high cooling rates observed, which limits its application to a large extent. In this study, the selective laser mel...