Room-Temperature Aqueous Synthesis of Copper Nanoparticles and Their In Situ Conversion to Copper Azides [0.03%]
室温水溶液中合成铜纳米颗粒及其原位转化为叠氮化铜
Chang Leng,Mingyu Li,Qingxuan Zeng et al.
Chang Leng et al.
Copper azides are promising energetic materials for miniaturized pyrotechnic devices and micro explosive trains owing to their short detonation growth distance and high initiation energy. However, controllable preparation of copper nanopart...
Enhanced Red Color Conversion via Mixing Green and Red Quantum Dots in a Polydimethylsiloxane-Based Color Conversion Layer [0.03%]
基于聚二甲基硅氧烷的颜色转换层中的绿色和红色量子点混合增强红色颜色转换
Sang-Uk Byun,Su-Been Lee,Seo-Young Kim et al.
Sang-Uk Byun et al.
Quantum dot (QD) color conversion technology has attracted considerable attention in QD-OLED displays because it enables the generation of highly pure red and green emissions from blue OLED excitation with reduced fabrication complexity. Mi...
Experimental Investigation on Cutting Characteristics and Surface Quality of TC18 Titanium Alloy in Longitudinal Ultrasonic-Vibration-Assisted Milling Under Dry Conditions [0.03%]
干式纵向超声振动辅助铣切TC18钛合金的切削特性及表面质量实验研究
Xiangyou Xue,Dongyan Shi,Biao Liu et al.
Xiangyou Xue et al.
This work presents a systematic investigation on dry milling of TC18 forged alloy using longitudinal ultrasonic vibration assistance. The effects of key parameters (cutting speed, feed per tooth, cutting depth and ultrasonic amplitude) on t...
Sustainably Synthesized CeO2 Nanoparticles from Lemon Juice and Sucrose for Antibacterial Applications [0.03%]
用柠檬汁和蔗糖可持续合成CeO2纳米粒子用于抗菌应用
Matilde Carvalho,Susana Devesa,Daniela Santo et al.
Matilde Carvalho et al.
Green synthesis of metal oxide nanoparticles is a promising route to reduce toxic reagents and energy consumption while enabling biocompatible nanomaterials for biomedical use. In this work, cerium oxide (CeO2) nanoparticles were synthesize...
Correction: Kang et al. Fluid Flow to Electricity: Capturing Flow-Induced Vibrations with Micro-Electromechanical-System-Based Piezoelectric Energy Harvester. Micromachines 2024, 15, 581 [0.03%]
更正： kang 等人。流体流动到电能：利用基于微机电系统的压电能量采集器捕获流动引起的振动。Micromachines 2024, 15, 581
Jin Gu Kang,Hyeukgyu Kim,Sangwoo Shin et al.
Jin Gu Kang et al.
With this correction, the Editorial Office together with the authors have made the following amendments to the published article [...].
Published Erratum
Micromachines. 2026 May 26;17(6):654. DOI:10.3390/mi17060654 2026
Femtosecond Laser Texturing of Wood Coatings with Bio-Based Epoxy and Wax Additives for Enhanced Hydrophobicity [0.03%]
生物基环氧树脂和蜡添加剂木质涂层的飞秒激光纹理化以增强其疏水性
Pieter Samyn,Patrick Cosemans,Olivier Malek
Pieter Samyn
Femtosecond laser surface texturing offers a promising route to tailor the functionality of bio-based wood coatings, yet the interplay between coating composition and laser processing remains poorly understood. In this study, bio-based epox...
José Pereira,Reinaldo Souza,Ana Moita
José Pereira
Optoelectronic devices are emerging as a cornerstone of advanced renewable energy technologies, offering innovative routes for energy harvesting, conversion, and management with high efficiency and versatility. This review summarizes recent...
Phase Transformation and Electrochemical Behavior of Hexagonal TiO2 Nanotubes Under Different Annealing Temperatures and Heating Rates [0.03%]
不同退火温度和加热速率下六方相TiO2纳米管的相变及其电化学行为研究
Aleksandra Jędrzejewska,Katarzyna Arkusz
Aleksandra Jędrzejewska
In this study, hexagonal titanium dioxide nanotubes (hTNTs) fabricated by sonoelectrochemical anodization were thermally modified in air to investigate the influence of annealing temperature and heating/cooling rate on phase evolution, stru...
Process Optimization and Predictive Modeling of Femtosecond Laser Precision Milling for Commercial PMMA Slices [0.03%]
商用PMMA片的飞秒激光精密加工工艺优化与预测模型建立
Guoying Wang,Long Chen,Chengshuang Zhang
Guoying Wang
This study investigates the process optimization and predictive modeling of femtosecond laser precision milling for commercial poly(methyl methacrylate) (PMMA) slices, with emphasis on surface roughness Ra and milling depth h. Three-dimensi...
A Hybrid Preprocessing Multi-Objective Surrogate Model for Thermal MEMS Actuators [0.03%]
用于热MEMS执行器的混合预处理多目标代理模型
Armin Aghajani,Ali Nazari,Phiona Buhr et al.
Armin Aghajani et al.
In this study, an advanced surrogate model is proposed to simultaneously predict five key output variables, including deformation, stress, temperature, current density, and resonance frequency. This study used two models: Gaussian Process R...