Metals and materials international文章索引

Effect of ambient pressure on the selective growth of square In2O3nanowires [0.03%] 环境压力对方形In2O3纳米线选择性生长的影响

Xia, Fan; Park, Keon Tae; Lee et al. Xia et al.

Metals and Materials International. 2013;19(3):623-627. DOI:10.1007/s12540-013-3014-x 2013

Assessment of the crack growth characteristics at the low corrosion fatigue limit of an A106 Gr b steel pipe weld [0.03%] A106 Gr B钢管道焊缝在低腐蚀疲劳极限下的裂纹扩展特性评估

Gyu young Lee; Dongho Bae; Sunkyu Park Gyu young Lee; Dongho Bae; Sunkyu Park

Metals and materials international. 2010;16(2):317-321. DOI:10.1007/s12540-010-0424-x 2010

Fabrication of Al matrix composite reinforced with submicrometer-sized Al2O3particles formed by combustion reaction between HEMM Al and V2O5composite particles during sintering [0.03%] 采用HEMM铝与V2O5复合颗粒在烧结过程中燃烧反应生成的亚微米级Al2O3颗粒增强的铝基复合材料的制备方法

Kee Do Woo; Jae Hwang Kim; Eui Pyo Kwon; Min Seok Moon; Hyun Bom Lee; Tatsuo Sato; Zhiguang Liu Kee Do Woo; Jae Hwang Kim; Eui Pyo Kwon; Min Seok Moon; Hyun Bom Lee; Tatsuo Sato; Zhiguang Liu

Metals and materials international. 2010;16(2):213-218. DOI:10.1007/s12540-010-0408-x 2010

Optimum content of Nafion ionomer for the fabrication of MEAs in PEMFCs with spray-coated Pt/CNT electrodes [0.03%] 用于制备具有喷涂Pt/CNT电极的质子交换膜燃料电池MEA的Nafion离子体最佳含量

Seong-Ho Choi; Dong-Won Jung; Sung-Ook Yoon; Soon Park; Eun-Suok Oh; Junbom Kim Seong-Ho Choi; Dong-Won Jung; Sung-Ook Yoon; Soon Park; Eun-Suok Oh; Junbom Kim

Metals and materials international. 2011;17(5):811-816. DOI:10.1007/s12540-011-1019-x 2011

Effect of Ti addition on tensile properties of Cu-Ni-Si alloys [0.03%] 钛添加对铜镍硅合金拉伸性能的影响

Eungyeong Lee; Seungzeon Han; Kwangjun Euh; Sunghwan Lim; Sangshik Kim Eungyeong Lee; Seungzeon Han; Kwangjun Euh; Sunghwan Lim; Sangshik Kim

Metals and materials international. 2011;17(4):569-576. DOI:10.1007/s12540-011-0807-7 2011

FE analysis of the sensitivity of friction calibration curves to dimensional changes in a ring compression test [0.03%] 环形压缩试验中摩擦标定曲线对尺寸变化敏感性的有限元分析

Jeong Hoon Noh; Jeong Min Seo; Beong Bok Hwang Jeong Hoon Noh; Jeong Min Seo; Beong Bok Hwang

Metals and materials international. 2011;17(2):187-197. DOI:10.1007/s12540-011-0402-y 2011

Tribological properties of brake friction materials with steel fibers [0.03%] 含钢纤维的制动摩擦材料的摩擦学性能

Sung Bin Park; Keun Hyung Cho; Sola Jung; Ho Jang Sung Bin Park; Keun Hyung Cho; Sola Jung; Ho Jang

Metals and materials international. 2009;15(1):27-32. DOI:10.1007/s12540-009-0027-6 2009

Microstructure evolution in Cu pillar/eutectic SnPb solder system during isothermal annealing [0.03%] 等温退火过程中Cu柱/共晶SnPb焊料体系的微观组织演变

Byoung-Joon Kim; Gi-Tae Lim; Jaedong Kim; Kiwook Lee; Young-Bae Park; Ho-Young Lee; Young-Chang Joo Byoung-Joon Kim; Gi-Tae Lim; Jaedong Kim; Kiwook Lee; Young-Bae Park; Ho-Young Lee; Young-Chang Joo

Metals and materials international. 2009;15(5):815-818. DOI:10.1007/s12540-009-0815-4 2009

Effect of solidification path and contraction on the cracking susceptibility of carbon peritectic steels [0.03%] 凝固路径与收缩对碳包晶钢裂纹敏感性的影响

Martin Herrera Trejo; Eddy Alfaro Lopez; Jose Jorge Ruiz Mondragon; Manuel de Jesus Castro Roman; Hugo Solis Tovar Martin Herrera Trejo; Eddy Alfaro Lopez; Jose Jorge Ruiz Mondragon; Manuel de Jesus Castro Roman; Hugo Solis Tovar

Metals and materials international. 2010;16(5):731-737. DOI:10.1007/s12540-010-1006-7 2010

Morphological transition of vertically aligned one-dimensional zinc oxide [0.03%] 垂直排列的一维氧化锌的形态转变

Kon Bae Lee; Ki Sub Cho; Hoon Kwon Kon Bae Lee; Ki Sub Cho; Hoon Kwon

Metals and materials international. 2009;15(4):649-653. DOI:10.1007/s12540-009-0649-8 2009