Stabilization of High-Volume Circulating Fluidized Bed Fly Ash Composite Gravels via Gypsum-Enhanced Pressurized Flue Gas Heat Curing [0.03%]
基于石膏强化烟气压力养护的高掺量循环流化床灰渣复合碎石稳定化研究
Nuo Xu,Rentuoya Sa,Yuqing He et al.
Nuo Xu et al.
Circulating fluidized bed fly ash (CFBFA) stockpiles release alkaline dust, high-pH leachate, and secondary CO2/SO2-an environmental burden that exceeds 240 Mt yr-1 in China alone. Yet, barely 25% is recycled, because the high f-CaO/SO3 con...
Investigation of the Performance and Fuel Oil Corrosion Resistance of Semi-Flexible Pavement with the Incorporation of Recycled Glass Waste [0.03%]
掺入回收玻璃废料的半柔性路面性能及燃油腐蚀性的研究
Ayman Hassan Al-Qudah,Suhana Koting,Mohd Rasdan Ibrahim et al.
Ayman Hassan Al-Qudah et al.
Semi-flexible pavement (SFP) is a durable and cost-effective alternative to conventional rigid and flexible pavement and is formed by permeating an open-graded asphalt (OGA) layer with high-fluidity cement grout. The degradation of SFP matt...
Mechanical Properties and Cutting Performance of Si3N4/Sc2W3O12 Composite Ceramic Tools Materials [0.03%]
Si3N4/Sc2W3O12复合陶瓷刀具材料的力学性能和切削性能研究
Zhiyuan Zhang,Xiaolan Bai,Jingjie Zhang et al.
Zhiyuan Zhang et al.
To address the poor thermal shock resistance and high brittleness of traditional ceramic tools, a novel Si3N4/Sc2W3O12 (SNS) composite ceramic material was developed via in situ synthesis using WO3 and Sc2O3 as precursors and consolidated b...
The Use of a Composite of Modified Construction Aggregate and Activated Carbon for the Treatment of Groundwater Contaminated with Heavy Metals and Chlorides [0.03%]
改性建筑集料和活性炭复合体处理含重金属和氯化物的地下水试验研究
Katarzyna Pawluk,Marzena Lendo-Siwicka,Grzegorz Wrzesiński et al.
Katarzyna Pawluk et al.
The treatment of contaminants from road infrastructure poses significant challenges due to their variable composition and the high concentrations of chloride ions, heavy metals, and oil-derived substances. Traditional methods for protecting...
Influence of In Situ Polymerization on the Compressive Strength of Scots Pine (Pinus sylvestris L.) Recovered from Demolition Timber and Two Forest-Sourced Species: European Beech (Fagus sylvatica) and Black Alder (Alnus glutinosa) [0.03%]
原位聚合对从拆解木材和两种森林木材来源的树种（欧洲山毛榉(Fagus sylvatica)和黑桤木(Alnus glutinosa）中回收的 Scots Pine(Pinus sylvestris L.) 的抗压强度的影响
Emil Żmuda,Kamil Roman
Emil Żmuda
This study investigated the effect of in situ polymerization on the compressive strength of demolition-derived Scots pine, European beech, and black alder wood. The treatment applied was based on previously confirmed in situ polymerization ...
Effects of Ti Substitution by Zr on Microstructure and Hydrogen Storage Properties of Laves Phase AB2-Type Alloy [0.03%]
Zr取代Ti对Laves相AB2型合金组织和储氢性能的影响
Xiaowei Guo,Lingxing Shi,Chuan Ma et al.
Xiaowei Guo et al.
In order to improve the hydrogen storage properties of Laves phase AB2-type alloys, a series of Ti1-xZrxMn1.0Cr0.85Fe0.1 (x = 0.1-0.5) alloys were prepared by arc melting. The effects of Zr content on microstructure and hydrogen storage pro...
Enzymatic Modification of Walnut Shell for High-Efficiency Adsorptive Methylene Blue Removal [0.03%]
walnut壳的酶改性高效吸附去除亚甲基蓝染料
Xifeng Lv,Xuejian Zhou,Ruiqi Yang et al.
Xifeng Lv et al.
Developing energy-efficient and environmentally benign synthesis protocols is crucial to agricultural waste-based adsorbent preparation. This study prepared novel walnut shell-derived adsorbents by enzymatic modification using a green proce...
Salt Formation of the Alliance of Triazole and Oxadiazole Towards Balanced Energy and Safety [0.03%]
三唑和噁二唑联盟的盐类向能量与安全平衡发展
Yang Liu,Meiqi Wang,Jiawei Men et al.
Yang Liu et al.
Balancing the energy and stability of energetic materials is a challenging task in their development. Salt formation is a promising strategy for seeking high-energy, low-sensitivity materials. In this study, the modification of anions facil...
Adam Rylski,Krzysztof Siczek
Adam Rylski
Nickel is used in aerospace, military, energy, and chemical sectors. Commercially pure (CP) Ni, and its alloys, including solid-solution strengthened (SSS), precipitation strengthened (PS), and specialty alloys (SA), are widely utilized, ty...
Stiffness and Density Relationships in Additively Manufactured Structures: A Virial Theorem-Based Approach [0.03%]
基于维里定理的增材制造结构刚度与密度关系研究
Tomáš Stejskal,Silvia Maláková,Marcela Lascsáková et al.
Tomáš Stejskal et al.
Topological optimization uses two main optimization conditions aimed at achieving the maximum stiffness at minimum weight of the loaded object, while not exceeding the allowable stress. This process naturally creates complex structures with...