Effect of build orientation in gloss, roughness and color of 3D-printed resins for provisional indirect restorations [0.03%]
用于临时间接修复的3D打印树脂的光泽度、粗糙度和颜色的构建方向的影响
Eduardo F de Castro,Gabriel Nima,Frederick A Rueggeberg et al.
Eduardo F de Castro et al.
Objectives: The purpose of this study was to evaluate the effect of build orientation of 3D-printed provisional resins (3DRs) on gloss (Gs), surface roughness (Sa), maximum profile valley depth (Rv), and color difference ...
Comparison of properties and cost efficiency of zirconia processed by DIW printing, casting and CAD/CAM-milling [0.03%]
DIW打印、铸造和计算机辅助设计制造的锆刚玉特性及成本效益比较
Isabell-Sophie Teegen,Philipp Schadte,Sebastian Wille et al.
Isabell-Sophie Teegen et al.
Objectives: The aim of this study was to evaluate the mechanical properties and cost efficiency of direct ink writing (DIW) printing of two different zirconia inks compared to casting and subtractive manufacturing. ...
Interaction of different concentrations of 10-MDP and GPDM on the zirconia bonding [0.03%]
不同浓度的10-甲基丙烯酰氧癸硫醇(GPDM)和10-甲基丙烯酰氧癸酸与二氧化锆结合性能的影响研究
Rafael Soares Calamita,Amanda André Diniz Oliveira,Giulia Gamero Pizzanelli et al.
Rafael Soares Calamita et al.
Objectives: To analyze the influence of different concentrations of 10-MDP and GPDM used, combined or not, on the bonding to zirconia. Methods: ...
Novel mechanically strong and antibacterial dimethacrylate copolymers based on quaternary ammonium urethane-dimethacrylate analogues [0.03%]
一类季铵氨基甲酸酯-甲基丙烯酸酯类似物共聚物的合成及其机械性能和抗菌性研究
Marta Chrószcz-Porębska,Alicja Kazek-Kęsik,Grzegorz Chladek et al.
Marta Chrószcz-Porębska et al.
Objectives: This study assumed that the quaternary ammonium urethane-dimethacrylate derivative (QAUDMA-m, where m was 8, 10, 12, 14, 16, 18, and corresponded to the number of carbon atoms in the N-alkyl substituent) can b...
Effect of airborne particle abrasion treatment of two types of 3D-printing resin materials for permanent restoration materials on flexural strength [0.03%]
两种3D打印树脂临床上用于永久修复材料的喷砂处理对弯折强度的影响
You-Jung Kang,Hoon Kim,Jiho Lee et al.
You-Jung Kang et al.
Objectives: This study aimed to assess the effects of airborne-particle abrasion (APA) on the flexural strength of two types of 3D-printing resins for permanent restoration. ...
In vitro analysis of durability of S-PRG filler-containing composite crowns for primary molar restoration [0.03%]
掺S-PRG填料复合冠修复乳磨牙的体外耐久性分析
Yutaro Nakase,Satoshi Yamaguchi,Ernesto B Benalcázar Jalkh et al.
Yutaro Nakase et al.
Objective: To evaluate the reliability, maximum principal stress, shear stress, and crack initiation of a computer-aided design/computer-aided manufacturing (CAD/CAM) resin composite (RC) incorporating surface pre-reacted...
Survival and debonding resistance of posterior cantilever resin-bonded fixed dental prostheses for moderately and severely worn dentition during thermomechanical loading [0.03%]
热机械负荷下后牙部分树脂结合固定修复体用于中重度磨耗牙列的生存率及抗脱层能力研究
Mohammed Ahmed Alghauli,Sebastian Wille,Frank Lehmann et al.
Mohammed Ahmed Alghauli et al.
Objectives: The purpose of this study was to investigate the survival rate, the debonding resistance, and the failure modes of different occlusal veneer designs when used as a retainer for posterior cantilever, resin-bond...
Impact of post printing cleaning methods on geometry, transmission, roughness parameters, and flexural strength of 3D-printed zirconia [0.03%]
后处理清洗方法对3D打印二氧化锆几何形态、透射率、粗糙度参数及弯曲强度的影响研究
A Liebermann,A Schultheis,F Faber et al.
A Liebermann et al.
Objective: To analyze the impact of different post printing cleaning methods on geometry, transmission, roughness parameters, and flexural strength of additively manufactured zirconia. ...
Dexamethasone and doxycycline functionalized nanoparticles enhance osteogenic properties of titanium surfaces [0.03%]
地塞米松和多西环素功能化纳米颗粒可增强钛表面的诱导成骨性能
Manuel Toledano-Osorio,Elvira de Luna-Bertos,Manuel Toledano et al.
Manuel Toledano-Osorio et al.
Objectives: To evaluate the effect of doxycycline and dexamethasone doped nanoparticles covering titanium surfaces, on osteoblasts proliferation and differentiation. ...
Bonding performance of experimental HEMA-free two-step universal adhesives to low C-factor flat dentin [0.03%]
无HEMA两步通用粘接剂与低C因子平坦牙本质的粘接力性能研究
C Tang,M H Ahmed,C Yao et al.
C Tang et al.
Objectives: Experimental two-step universal adhesives (2-UAs) providing a particle-filled hydrophobic adhesive resin with a significant film thickness to hydrophobically seal the adhesive interface were designed and synth...