Thermally Sprayed Functional Coatings and Multilayers: A Selection of Historical Applications and Potential Pathways for Future Innovation [0.03%]
热喷涂功能涂层和多层结构：历史应用及未来创新途径的选择
Edward J Gildersleeve,Robert Vaßen
Edward J Gildersleeve
Thermal spray coatings are material systems with unique structures and properties that have enabled the growth and evolution of key modern technologies (i.e., gas turbines, structurally integrated components, etc.). The inherent nature of t...
Antibacterial and Virucidal Evaluation of Ultrafine Wire Arc Sprayed German Silver Coatings [0.03%]
抗菌和病毒灭活性能的超细钨银合金电弧喷涂涂层研究
Seyed Navid Bassam,Hamidreza Salimijazi,Sheyda Labbaf et al.
Seyed Navid Bassam et al.
Copper and its alloys are known as antimicrobial agents that can be used in public places; however, pure copper has a low wear resistance and tends to lose its gloss relatively fast and stainless steel is still more desirable because of its...
Antiviral and Antibacterial Cold Spray Coating Application on Rubber Substrate, Disruption in Disease Transmission Chain [0.03%]
抗病毒和抗菌冷喷涂橡胶基材的应用，打破疾病传播链
D C Saha,S J Boegel,S Tanvir et al.
D C Saha et al.
The objective of this study was to prepare a copper-coated rubber surface using cold spray technology with improved virucidal and antimicrobial properties to fight against highly transmissible viruses and bacteria. A successful cold spray c...
Peridynamic Simulation of Particles Impact and Interfacial Bonding in Cold Spray Process [0.03%]
冷喷涂过程中的颗粒冲击及界面结合的peri动力学模拟研究
Baihua Ren,Jun Song
Baihua Ren
Cold spray has recently emerged as a promising new technology for various coating, additive manufacturing, and on-site repair needs. One key challenge underlying cold spray is the proper simulation of the deposition process, for which numer...
Ensemble Methods for APS In-Flight Particle Temperature and Velocity Prediction Considering Torch Electrodes Ageing [0.03%]
考虑电极老化影响的APS飞行粒子温度和速度集成预测方法研究
K R Yu,C V Cojocaru,F Ilinca et al.
K R Yu et al.
The nonlinear relationship between the input process parameters and in-flight particle characteristics of the atmospheric plasma spray (APS) is of paramount importance for coating properties design and quality. It is also known that the age...
Mechanical and Fatigue Properties of Diamond-Reinforced Cu and Al Metal Matrix Composites Prepared by Cold Spray [0.03%]
冷喷涂制备的金刚石增强铜基和铝基复合材料的力学及疲劳性能
O Kovarik,J Cizek,S Yin et al.
O Kovarik et al.
Diamond-reinforced metal matrix composites (DMMC) prepared by cold spray are emerging materials simultaneously featuring outstanding thermal conductivity and wear resistance. In our paper, their mechanical and fatigue properties relevant to...
The Influence of Substrate Topography on the Plasma Jet Flow in the Substrate Boundary Layer under Suspension Plasma Spray Conditions: A Numerical Approach [0.03%]
底板形貌对悬空等离子喷涂条件下底板边界层内 plasma jet 流动影响的数值研究
Tomasz Kiełczawa,Paweł Sokołowski,Aleksandra Małachowska
Tomasz Kiełczawa
This study deals with the numerical analysis of the plasma jet behavior close to the substrate surface depending on its topography. It uses a 2D axisymmetric time-dependent CFD model solved with the Ansys Fluent 2020/R1 package. The model t...
Improvement of Tool Steel Powder Cold Sprayability Via Softening and Agglomeration Heat Treatments [0.03%]
退火团聚改善粉末冷喷涂性研究——以工具钢为例
D Poirier,Y Thomas,B Guerreiro et al.
D Poirier et al.
Cold spray can produce deposits from a broad range of materials but reports on cold spray of steels are still limited to the few steel families demonstrating high ductility and medium strength. Softening and agglomeration of steel powders v...
Recent Research Advances in Plasma Spraying of Bulk-Like Dense Metal Coatings with Metallurgically Bonded Lamellae [0.03%]
冶金结合金属板材涂层喷射最新研究进展
Chang-Jiu Li,Xiao-Tao Luo,Xin-Yuan Dong et al.
Chang-Jiu Li et al.
Although thermal spray metallic coatings have been widely used for materials protection from wear, corrosion and oxidation, its porous feature limits the full utilization of materials potential. Moreover, the oxidation inherent to thermal s...
Plasma-Sprayed (Bi2O3)0.705 (Er2O3)0.245 (WO3)0.05 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs) [0.03%]
用于 intermediate-temperature solid oxide fuel cells(IT-SOFCs)的(Bi2O3)0.705(Er2O3)0.245(WO3)0.05电解质的等离子喷涂技术
Rui Chen,Cheng-Xin Li,Chang-Jiu Li
Rui Chen
Stabilized bismuth oxide material with fluorite structure (δ-Bi2O3) has been studied as a promising electrolyte material for intermediate temperature solid oxide fuel cells (IT-SOFCs) due to its high oxygen ion conductivity in mediate temp...