Failure Load of Monolithic Lithium Disilicate Implant-Supported Single Crowns Bonded to Ti-base Abutments versus to Customized Ceramic Abutments after Fatigue [0.03%]
全瓷基台与个性化陶瓷基台粘结的锂二硅酸单体植入冠在疲劳后的断裂载荷比较研究
F A Spitznagel,E A Bonfante,F Vollmer et al.
F A Spitznagel et al.
Purpose: This laboratory study analyzed the influence of retention mode (screw- vs cement retained) and fatigue application on the failure load of monolithic lithium-disilicate (LDS) implant-supported single crowns (ISSC)...
Prosthetically-Driven Full-Mouth Implant-Supported Prostheses Using Guided Surgical Implant Planning with Composite Resin Markers: A Case Report [0.03%]
导板辅助种植复合树脂标志全口种植义齿的 prosthetically-driven 全口种植修复：病例报告
Guillermo Cabanes-Gumbau,Rubén Agustín-Panadero,Marta Revilla-León et al.
Guillermo Cabanes-Gumbau et al.
This report describes a prosthetically-driven implant planning method, guided by the alignment procedures between the cone beam computed tomography, intraoral digital scans, and digitized maxillary and mandibular interim complete dentures u...
Time and Accuracy of the CEREC Omnicam Using Two Different Software Programs [0.03%]
CEREC Omnicam使用两个不同软件的时间和精确度研究
Douglas A Porr,Daniel I Brooks,Peter C Liacouras et al.
Douglas A Porr et al.
Purpose: The purpose of this in vitro study was to evaluate the effect of software on scan time, trueness, and precision of digital scans created using the CEREC Omnicam. ...
The Effectiveness of Students' Performance in Preclinical Fixed Prosthodontics Course in Predicting Subsequent Clinical Performance [0.03%]
牙科技工士预科班成绩预测后续临床表现的效果
Nadia S Al-Angari,Atheer S Aldaham,Emad Masuadi et al.
Nadia S Al-Angari et al.
Purpose: To evaluate the correlation between students' achieved grades in a preclinical fixed prosthodontics course and their performance in the same discipline's clinical courses. ...
Clinical Performance of CAD/CAM Monolithic Lithium Disilicate Implant-Supported Single Crowns Using Solid or Predrilled Blocks in a Fully Digital Workflow: A Retrospective Cohort Study With Up To 33 Months of Follow Up [0.03%]
基于全数字化工作流程的CAD/CAM单块锂二硅酸陶瓷种植支持单冠修复体的临床表现：一种使用实心或预钻坯料的回顾性队列研究（随访时间长达33个月）
Despoina Bompolaki,Amit Punj,Christopher Fellows et al.
Despoina Bompolaki et al.
Purpose: To assess the clinical performance of CAD/CAM monolithic implant-supported restorations manufactured using a fully digital workflow and two different types of ceramic blocks. ...
Impact of the Microstructure of CAD/CAM Blocks on the Bonding Strength and the Bonded Interface [0.03%]
CAD/CAM块的微观结构对其 bonding强度和界面的影响
Hazem Abouelleil,Pierre Colon,Christophe Jeannin et al.
Hazem Abouelleil et al.
Purpose: To investigate the relationship between the microstructure of CAD/CAM blocks and the quality of adhesion as function of the surface treatment and resin cement type. ...
A Full Digital Workflow for the Duplication of an Existing Implant Retained Overdenture Prosthesis: A Novel Approach [0.03%]
一种数字化工作流程用于复制现有的种植体支持式 overdenture 义齿的一种新方法
Theodoros Tasopoulos,George Kouveliotis,Ioannis Karoussis et al.
Theodoros Tasopoulos et al.
The purpose of this clinical case report is to describe a fully digital workflow for the duplication of an existing implant retained overdenture, highlighting the benefits of digitally fabricated dentures. The patient presented with an exis...
Clinical Evaluation of Crestal Bone Levels, Peri-Implant Indices, and Mucosal Margin Position of Immediately Impressed Posterior Dental Implants: A Cross-Sectional Study [0.03%]
后牙即刻负重种植体的crestal骨水平、 peri-implant指标和黏膜边缘位置的临床评价：横断面研究
Loren Genetti,Carlo Ercoli,Elli Anna Kotsailidi et al.
Loren Genetti et al.
Purpose: This is a cross-sectional clinical study to evaluate crestal bone levels, mucosal margin position, probing depths, bleeding on probing, and plaque and bleeding indices of implants restored with an immediate impre...
Influence of Liquid on the Tooth Surface on the Accuracy of Intraoral Scanners: An In Vitro Study [0.03%]
液体对口腔内扫描仪准确性影响的体外研究
Yuming Chen,Zhihao Zhai,Hefei Li et al.
Yuming Chen et al.
Purpose: To assess the influence of liquid attached on the tooth surfaces on the accuracy (trueness and precision) of intraoral scanners and the effectiveness of the drying method (using compression air) to exclude the in...
Complete Digital Workflow for Mandibular Full-Arch Implant Rehabilitation in 3 Appointments [0.03%]
三次就诊完成下颌全口种植的数字化全流程
Panos Papaspyridakos,Andre De Souza,Anshu Bathija et al.
Panos Papaspyridakos et al.
The aim of this clinical report is to describe a complete digital workflow protocol for mandibular full-arch implant rehabilitation from guided surgery to definitive prosthesis in only 3 appointments. This expedited protocol allows for guid...