Accuracy of implant surgery planning and surgery with a dental robot in transcrestal sinus floor elevation [0.03%]
种植体牙科机器人的穿越齿槽骨上颌窦提升手术导板的精度研究
Yulan Wang,Yaoyu Zhao,Jiaxian Chen et al.
Yulan Wang et al.
Purpose: The present in vitro study aims to evaluate the potential of a dental robot to enhance implant accuracy in transcrestal sinus floor elevation (tSFE). ...
Validation of the modified Pink Esthetic Scores for single implant esthetic evaluation using intraoral scanning data [0.03%]
基于口腔内扫描数据的改良Pink美学评分单颗种植美学效果评价验证研究
Ziang Wu,Yaqin Wu,Xinbo Yu et al.
Ziang Wu et al.
Purpose: To evaluate the feasibility of esthetic evaluation using modified Pink Esthetic Scores (PES) criteria based on the intraoral scanning data. Mater...
Restoration of excessive interocclusal restoration space post-mandibulectomy using a two-platform implant-supported fixed prosthesis: A case report [0.03%]
下颌骨切除术后过大的咬合空间的修复：采用两平台种植体支持式固定义齿治疗1例报告
Virat Hansrani,Omnia Saleh,Gurkan Goktug
Virat Hansrani
Rehabilitating patients after segmental mandibulectomy is challenging, particularly when faced with excessive interocclusal restorative space. This case report describes the treatment of a 65-year-old male with a 34-mm interocclusal space f...
Custom nasopharyngeal dilator for management of pharyngeal stenosis: A multidisciplinary approach to long-term airway patency [0.03%]
咽部狭窄的鼻咽扩张器的制作和管理：长期维持气道通畅的多学科方法
Jessica Canallatos,Robert Perry
Jessica Canallatos
Nasopharyngeal stenosis is a rare but serious condition that can result from trauma, infection, or postoperative scarring, often leading to significant impairment of nasal breathing and quality of life. Surgical correction may be limited by...
Effects of printing temperature and post-curing duration on the dimensional reproducibility and fracture load of 3D-printed dental prostheses: An exploratory study [0.03%]
打印温度和后固化时间对3D打印义齿尺寸再现性和断裂载荷的影响：一项探索性研究
Ji-Min Lee,KeunBaDa Son,Kyu-Bok Lee
Ji-Min Lee
Purpose: This in vitro study aimed to evaluate the effects of printing temperature and post-curing duration on the dimensional reproducibility and mechanical properties of three-dimensional (3D)-printed dental prostheses....
Influence of simulated gastric acid on surface roughness and substance loss of different dental veneering porcelains and different surface finishing protocols: An in vitro study [0.03%]
模拟胃酸对不同饰面瓷和不同表面处理工艺的表面粗糙度及物质损失的影响：一项体外研究
Mahi Mohamed Abdelrahman,Sanaa H Abdelkader,Islam M Abdelraheem
Mahi Mohamed Abdelrahman
Purpose: Patients with bulimia nervosa or gastroesophageal reflux disease (GERD) are frequently exposed to gastric acid, which may cause tooth demineralization and degradation of dental ceramics. This in vitro study inves...
Five-year survival and failure patterns of complete arch fixed implant-supported monolithic zirconia prostheses: A retrospective analysis of 3300 laboratory cases [0.03%]
完全固定式种植支持单块氧化锆全拱桥义齿五年的生存率及失败原因：3300例实验室病例的回顾性分析
Faris A Alshahrani,Atheer Alshehri,Ayham Chaban et al.
Faris A Alshahrani et al.
Purpose: To evaluate the five-year survival rate and complication spectrum of complete arch fixed implant-supported zirconia prostheses (CAFIPs) fabricated by a commercial dental laboratory in Dubai, UAE, aiming to identi...
Effect of denture cleansers and surface treatments on the color stability, gloss, and wettability of CAD-CAM denture bases [0.03%]
义齿清洁剂和表面处理对CAD-CAM义齿基托着色稳定性、光泽度和亲水性的影响
Suonds Alareifi,Amal Alfaraj,Frank Lippert et al.
Suonds Alareifi et al.
Purpose: To evaluate the impact of surface treatments and chemical denture cleansers on the surface color stability, gloss, and wettability of compression-molded, 3D-printed, and milled denture base materials. ...
Effect of resin type, cleaning solution, and aging on the mechanical properties and reliability of additively manufactured occlusal devices [0.03%]
树脂类型、清洗溶液和老化对增量制造牙合板的力学性能和可靠性的影响
Selim Polat,Ayyüce Nur Tezcan,Hanan Al-Johani et al.
Selim Polat et al.
Purpose: The purpose of this in vitro study was to investigate the effect of alcohol-free cleaning solutions on the mechanical properties and reliability of additively manufactured occlusal device resins, compared with is...
Effect of clinical-crown height space on extra-narrow dental implant (2.9 mm) fracture load and failure mode [0.03%]
临床冠高空间对超窄(2.9毫米)种植体折断负荷及失效模式的影响
Norah ALsaad,Tariq Abduljabbar,Fahim Vohra et al.
Norah ALsaad et al.
Purpose: Implant diameter and increased crown height space (CHS) are factors that critically affect the fracture load of extra-narrow dental implant (ENDI) restorations. The present study aims to evaluate the effect of di...