Design of a measurement system for temperature distribution in continuous-flow microwave heating of pumpable fluids using infrared imaging and fiber optic technology [0.03%]
基于光纤和红外成像技术的连续流微波加热温度分布测量系统设计
Nicholas Matthew Gerbo,Dorin Boldor,Cristina Mirela Sabliov
Nicholas Matthew Gerbo
Continuous microwave heating has the potential to revolutionize processing operations in which high energy densities per unit volume are required. The adoption of microwave heating for large scale commercial application has been hampered by...
Igor Smirnov
Igor Smirnov
This article is related to the proposed hypothesis and experimental data regarding the ability of defined polar polymer compound (MRET polymer) applied to RF phones to increase the dielectric permittivity of water based solutions and to red...
Angela J Winstead,Richard Williams,Krystal Hart et al.
Angela J Winstead et al.
Cyanine dyes are an interesting class of near infrared (NIR) dyes that have captured the interest of the scientific community. The NIR cyanine dye of interest, heptamethine cyanine dye NIR-1, exhibits characteristics that satisfy the qualif...
An examination of athermal photonic effects on boron diffusion and activation during microwave rapid thermal processing [0.03%]
用于微波快速热处理过程中硼扩散和激活的非热光子效应的研究
Christopher J Bonifas,Keith Thompson,John H Booske et al.
Christopher J Bonifas et al.
This work examines the role of 672 nm optical illumination on the diffusion and activation of B in Si as a function of various factors. The factors studied include length of anneal, maximum temperature of anneal, type of co-implanted and pr...
Microwave-induced mass transport enhancement in nano-porous aluminum oxide membranes [0.03%]
微波诱导纳米多孔氧化铝膜中的质量传递增强效应
Christopher J Bonifas,Amy Marconnet,John Perry et al.
Christopher J Bonifas et al.
Experiments were conducted to compare the annealing of nano-porous aluminum oxide membranes by 2.45 GHz microwave radiation and by conventional (resistive element) furnace heating. The starting material was Al2O3 membranes that were 60 micr...
Gurcharan S Rahi,Jimmy R Rich
Gurcharan S Rahi
Microwave radiation of 2450 MHz frequency was used to irradiate sandy loam soil placed in 12 cm high and 10 cm dia columns as a function of exposure times of 30, 45, 60, and 120 s. This was done to evaluate the effect of radiation on the hi...
SAR changes in a human head model for plane wave exposure (500 - 2500 MHz) and a comparison with IEEE 2005 safety limits [0.03%]
平面波照射下(500-2500MHz)人体头模的SAR变化及与IEEE2005标准限值比较研究
Tanju Yelkenci,Selcuk Paker
Tanju Yelkenci
In this paper, external electric field values that are derived from the largest peak average 10 g SAR (Specific Absorption Rate) results in a realistic human head model are compared with current IEEE and ICNIRP reference levels. The head is...
Evidence for non-thermal microwave effects using single and multimode hybrid conventional/microwave systems [0.03%]
利用单一模式和多模式混合传统/微波系统证明非热微波效应
Jon Binner,Bala Vaidhyanathan,Jianxin Wang et al.
Jon Binner et al.
Clear evidence for the microwave effect has been observed during experiments in which a variety of materials have been heated using experimental systems that allowed both conventional and conventional-microwave hybrid heating. A hybrid sing...
Influence of mashed potato dielectric properties and circulating water electric conductivity on radio frequency heating at 27 MHz [0.03%]
马铃薯泥介电特性及循环水电导率对27MHz射频加热的影响
Jian Wang,Robert G Olsen,Juming Tang et al.
Jian Wang et al.
Experiments and computer simulations were conducted to systematically investigate the influence of mashed potato dielectric properties and circulating water electric conductivity on electromagnetic field distribution, heating rate, and heat...
Thorsten Kayser,Mario Pauli,Werner Wiesbeck
Thorsten Kayser
This paper presents the design and realization of a microwave applicator at 2.45 GHz for the synthesis of gold nanoparticles. The particles are dissolved in N,N-dimethylformamide (DMF). The heating rate is approximately 8 K/s to achieve a s...