D V Louzguine-Luzgin,S Li,G Q Xie et al.
D V Louzguine-Luzgin et al.
In the present study we investigate the stability of Cu50Zr45Al5 and Ni59Ti16Zr20Sn5 glassy powders and the formation of the bulk metallic glassy samples by microwave heating in a single mode cavity (915 MHz) in the alternating magnetic fie...
Daniel Ighigeanu,Ioan Calinescu,Diana Martin et al.
Daniel Ighigeanu et al.
This work presents a method and a semi-pilot scale installation (SPSI) for the simultaneous SO2 and NOx removal by separate and combined microwave (MW) and electron beam (EB) irradiation. The SPSI consists mainly of the following units: a g...
Electrical conductivity of microwave heated polyaniline nanotubes and possible mechanism of microwave absorption by materials [0.03%]
微波加热法制备聚苯胺纳米管及其材料吸波机理研究
Takahiro Murai,Ryo Fukasawa,Tohru Muraoka et al.
Takahiro Murai et al.
In the course of experiments to perform deprotonation and carbonization of doped polyaniline (PANI) nanotubes (NTs) by irradiating directly 2.45 GHz microwave (MW) in our microwave heating system (MWHS), we have discovered that the PANI-NTs...
Numerical simulation of temperature distribution in multi-phase materials as a result of selective heating by microwave energy [0.03%]
微波选择性加热多相材料的温度分布数值模拟研究
Noboru Yoshikawa,Yoshio Tokuyama
Noboru Yoshikawa
In order to discuss the temperature distributions due to microwave (MW) selective heating of multi-phase solids, numerical analysis was conducted. The simulation was performed assuming the dielectric heating mechanism in a dual phase solid ...
Microwave heating characteristic of multilayered structures in a single-mode cavity [0.03%]
单一模式谐振腔中多层结构的微波加热特性
Ziping Cao,Zhanjie Wang,Noboru Yoshikawa et al.
Ziping Cao et al.
In this study, nonconductor (PZT), semiconductor (Si) and conductor (Pt/Ti) whose permittivity and permeability are distinctive are prepared into various multilayered structures for exploring the heating behavior of microwave (2.45 Hz) in a...
Fabrication of Ni-Nb-Sn metallic glassy alloy powder and its microwave-induced sintering behavior [0.03%]
镍铌锡金属玻璃合金粉体制备及其微波烧结行为研究
Guoqiang Xie,Song Li,D V Louzguine-Luzgin et al.
Guoqiang Xie et al.
In the present study, we prepared Ni59.35Nb34.45Sn6.2 metallic glassy alloy powder by an argon gas atomization process. Microwave (MW)-induced heating and sintering was carried out by a single-mode 2.45 GHz MW applicator in the separated ma...
Avijit Mondal,Anish Upadhyaya,Dinesh Agrawal
Avijit Mondal
Microwave processing is emerging as an innovative and highly effective material processing method offering many advantages over conventional methods, especially for sintering applications. It is recognized for its various advantages, such a...
Microwave heating of pure copper powder with varying particle size and porosity [0.03%]
不同粒径和孔隙度的纯铜粉微波加热行为研究
Avijit Mondal,Dinesh Agrawal,Anish Upadhyaya
Avijit Mondal
In recent years, microwave processing of metal/alloy powders have gained considerable potential in the field of material synthesis. Microwave heating is recognized for its various advantages such as: time and energy saving, rapid heating ra...
Gabriela Craciun,Diana Martin,Iulian Togoe et al.
Gabriela Craciun et al.
A new radiation biotechnology for the acquirement of a commercial vaccine, designed for prophylaxis of ruminant infectious pododermatitis (IP), produced by gram negative bacteria Fusobacterium necrophorum (F.n.), is presented. Two different...
Time dependence of component temperatures in microwave heated immiscible liquid mixture [0.03%]
微波加热不互溶液体混合物的组元温度的时变性研究
Alvin Kennedy,Aron Reznik,Solomon Tadesse et al.
Alvin Kennedy et al.
Measured influence of microwave heating on time dependencies of component temperatures for two immiscible liquids in a mixture shows differences for polar (water) and non-polar (cyclohexane or carbon tetrachloride) liquids. The rate of incr...