Digital volume correlation analysis of polylactic acid based fused filament fabrication printed composites [0.03%]
基于聚乳酸的熔融挤出沉积打印复合材料的数字体积相关性分析
Cristofaro S Timpano,Garrett W Melenka
Cristofaro S Timpano
Fused filament fabrication (FFF) has rapidly begun to see implementation in industrial fields as a method of rapid manufacturing. Traditional FFF parts are made from a single thermoplastic polymer. The polymer is heated to its melting point...
Guided Wave-based System for Real-time Cure Monitoring of Composites using Piezoelectric Discs and Phase-shifted Fiber Bragg Gratings [0.03%]
基于相移光纤布拉格光栅和压电圆盘的复合材料实时固化监测系统
Tyler B Hudson,Nicolas Auwaijan,Fuh-Gwo Yuan
Tyler B Hudson
A real-time, in-process cure monitoring system employing a guided wave-based concept for carbon fiber reinforced polymer (CFRP) composites was developed. The system included a single piezoelectric disc that was bonded to the surface of the ...
Out-of-autoclave manufacturing of GLARE panels using resistance heating [0.03%]
采用电阻加热法制造GLARE夹层结构的袋压工艺研究
Bernhard Müller,Genevieve Palardy,Sofia Teixeira De Freitas et al.
Bernhard Müller et al.
Autoclave manufacturing of fibre metal laminates, such as GLARE, is an expensive process. Therefore, there is an increasing interest to find cost-effective out-of-autoclave manufacturing processes without diminishing the laminate quality. T...
Fatigue life and damage tolerance of postbuckled composite stiffened structures with indentation damage [0.03%]
具有压入损伤的后屈曲复合材料加筋结构的疲劳寿命与容耐损伤性分析
Carlos G Dávila,Chiara Bisagni
Carlos G Dávila
The fatigue life and damage tolerance of composite stiffened panels with indentation damage are investigated experimentally using single-stringer compression specimens. The indentation damage was induced to one of the two flanges of the str...
Experimental investigation of reinforced bonded joints for composite laminates [0.03%]
复合材料层合板胶接加强接头的实验研究
Chiara Bisagni,Domenico Furfari,Marco Pacchione
Chiara Bisagni
An experimental study has been carried out to investigate the behaviour of co-bonded carbon fibre reinforced plastics joints with a novel design incorporating a through the thickness local reinforcement. Different specimens were manufacture...
Amol S Patki,Murat Vural,Mike Gosz
Amol S Patki
This study focuses on the mechanical response of a particle-reinforced restorative dental composite (Renew™) under proportional transverse confinement to understand the effects of stress multiaxiality on its mechanical and failure behavior...
Polymerization shrinkage and stress development in amorphous calcium phosphate/urethane dimethacrylate polymeric composites [0.03%]
无定形钙磷酸盐/尿烷二丙烯酸酯聚合物复合材料的聚合收缩和应力生成
J M Antonucci,W F Regnault,D Skrtic
J M Antonucci
This study explores how substituting a new high molecular mass oligomeric poly(ethylene glycol) extended urethane dimethacrylate (PEG-U) for 2-hydroxyethyl methacrylate (HEMA) in photo-activated urethane dimethacrylate (UDMA) resins affects...
ILLUMINATING THE ROLE OF AGGLOMERATES ON CRITICAL PHYSICOCHEMICAL PROPERTIES OF AMORPHOUS CALCIUM PHOSPHATE COMPOSITES [0.03%]
聚集态对无定形钙磷酸盐复合材料关键物理化学性质影响的探究
J N R O&#x;Donnell,J M Antonucci,D Skrtic
J N R O&#x;Donnell
Water sorption (WS), mechanical strength, and ion release of polymeric composites formulated with 40 % as-made or milled amorphous calcium phosphate (ACP) are compared after 1, 2 and 3 months of aqueous exposure. Ethoxylated bisphenol A dim...