Combination of ball milling mechanochemistry with thermal treatment for sustainable preparation of starch laurates [0.03%]
球磨化学与热处理相结合可持续制备淀粉月桂酸酯
Meng An,Panpan Yuan,Yanyan Chen et al.
Meng An et al.
Starch is one of the most common bio-polymers with abundant reserves, but its utilization is restricted by the poor thermoplasticity and water resistance.
Research on the Solidification Structure and Thermoplasticity of CJ5L Recycled Stainless Steel [0.03%]
CJ5L再生不锈钢的凝固组织与热塑性研究
Xianbang Dong,Xiang Li,Lei Huang et al.
Xianbang Dong et al.
Therefore, the residual ferrite, solidification structure, and high-temperature thermoplasticity in both Recycled and Non-Recycled steel ingots are examined. The principal experimental techniques employed include SEM, OM, EPMA, and EDS....The high-temperature thermoplasticity analysis of CJ5L stainless steel showed that at temperatures between 800 °C and 900 °C, the casting displayed optimal properties, minimizing crack formation during subsequent processing.
Preparation and Characterizations of Intrinsically Black Polyesterimide Films with Good Thermal Endurance at Elevated Temperatures for Potential Two-Layer Flexible Copper Clad Laminate Applications [0.03%]
具有优良高温热耐久性的本征型黑色聚酯亚胺薄膜的制备及表征用于潜在的双层柔性覆铜板应用
Shujun Han,Xi Ren,Duanyi Li et al.
Shujun Han et al.
The PEsI samples exhibited good thermoplasticity and the storage and loss modulus of the films rapidly decreased around the glass transition temperatures (Tg) in the dynamic mechanical analysis (DMA) tests.
Effects of Ring Opening and Chemical Modification on the Properties of Dry and Moist Cellulose─Predictions with Molecular Dynamics Simulations [0.03%]
环张力释放和化学修饰对干湿纤维素性能的影响─分子动力学模拟预测
Patric Elf,Per A Larsson,Anette Larsson et al.
Patric Elf et al.
All ring-opened systems exhibited higher molecular mobility, which, consequently, improved thermoplasticity (processability) compared to that of the unmodified amorphous cellulose.
Ji-Hyun Cho,Kwang-Hyun Ryu,Hyun-Joong Kim et al.
Ji-Hyun Cho et al.
However, the inherent brittleness, hydrophilicity, and lack of thermoplasticity of native starch limit its application in material science. This study addresses the limitations of native starch by converting it to dialdehyde starch (DAS) and cross-linking with polyether diamines via imine bonds.
Creation of fully degradable and mechanically robust poly(4-hydroxybutyrate) films by filling modified starch [0.03%]
通过填充改性淀粉制备全降解且力学性能优良的聚4-羟基丁酸薄膜
Xinyi Chen,Yitong Ding,Mingjiao Li et al.
Xinyi Chen et al.
In this study, the ball-milling starch grafting process is adopted, which can simultaneously solve the two major deficiencies of starch, and the prepared ball-milling starch-g-polycaprolactone (BSt-g-PCL) has thermoplasticity and better compatibility with P4HB.
Lead Bromide Complex in Tri-n-octylphosphine Oxide Matrix with Bright Photoluminance and Exceptional Thermoplasticity [0.03%]
具有明亮光致发光和优异热塑性的三辛基氧化磷铅溴化物复合材料
Yu Hou,Yuting Sun,Jingjing He et al.
Yu Hou et al.
Metal halide materials have recently drawn increasing research interest for their excellent opto-electronic properties and structural diversity, but their resulting rigid structures render them brittle and poor formability during manufactur...
Chunmei Xu,Shuo Yang,Anxiang Chen et al.
Chunmei Xu et al.
Moreover, the original TOCNC structure changed owing to the presence of GA, which endowed a certain thermoplasticity owing to the formation of ester groups.
Insight into the Feasibility of Fatty Acyl Chlorides with 10-18 Carbons for the Ball-Milling Synthesis of Thermoplastic Cellulose Esters [0.03%]
具有10-18个碳的脂肪酰氯用于研磨合成热塑性纤维素酯的可能性分析
De-Fa Hou,Pei-Yao Li,Kai Zhang et al.
De-Fa Hou et al.
Fatty acid cellulose esters (FACE) are common cellulose-based thermoplastics, and their thermoplasticity is determined by both the contents and the lengths of the side chains....Herein, various FACE were synthesized by the ball-milling esterification of cellulose and fatty acyl chlorides containing 10-18 carbons, and their structures and thermoplasticity were thoroughly studied.
Synthesis and physical properties of polyhydroxyalkanoate (PHA)-based block copolymers: A review [0.03%]
聚羟基烷酸酯(PHA)嵌段共聚物的合成及其物理性能：综述
Jingjing Mai,Katrin Kockler,Emily Parisi et al.
Jingjing Mai et al.
In general, their thermoplasticity and (in some forms) their elasticity makes them attractive alternatives to petrochemical-derived polymers.
耗时 0.08276 秒，为您在
48229835
条记录里面共找到 102 篇文章 [XML]