Does the Use of Different Remineralisation Agents in a 14-day Demineralisation/Remineralisation Cycle Affect the Bond Strength to Artificial Carious Enamel Surfaces? [0.03%]
不同的再矿化剂在14天脱矿/再矿化周期中对人工龋齿 enamel 表面粘接强度的影响？
Özgül Carti Dörterler,Fatma Yilmaz,Saniye Eren Halici et al.
Özgül Carti Dörterler et al.
Conclusions: Remineralisation agents in forms other than varnish do not negatively affect the shear-bond strength to enamel surfaces.
Effect of Surface Treatments on Shear-bond Strength of Glass Ionomer Cements to Silver Diamine Fluoride-treated Simulated Carious Dentin [0.03%]
表面处理对玻璃离子水泥与银氨氟治疗模拟龋齿牙本质剪切粘接强度的影响
W T Koh,O T Yeoh,N A Yahya et al.
W T Koh et al.
Objectives: This study investigated the effect of different surface treatments on the shear bond strength (SBS) and failure modes of self-cured (SC) and light-cured (LC) high-viscosity glass ionomer cements (HVGICs) to si...
Effect of Surface Treatments Applied to 3D Printed Permanent Resins on Shear Bond Strength [0.03%]
关于表面处理对3D打印永久树脂切端强度影响的体外研究
Bilge Ersöz,Numan Aydın,Bahadır Ezmek et al.
Bilge Ersöz et al.
The aim of this study is to evaluate the effect of surface treatment methods on the shear-bond strength (SBS) between 3D-printed permanent resins and adhesive cement.
Effect of Photo-polymerization Delay on the Bond Strength and Microhardness of Dual-polymerizing Resin Cements [0.03%]
光聚合延迟对双固化树脂水泥 bonding strength及微硬度的影响
B Alsayed,A A Suliman,W Clark et al.
B Alsayed et al.
Purpose: Evaluate photo-polymerization delay time on dentin shear-bond strength and Vickers microhardness of dual-polymerizing resin cements.
Effect of Different Surface Treatments on the Shear Bond Strength of Metal Orthodontic Brackets Bonded to CAD/CAM Provisional Crowns [0.03%]
不同表面处理方法对金属托槽与CAD/CAM临时冠 shear bond strength 影响的体外研究
Dany Haber,Elie Khoury,Joseph Ghoubril et al.
Dany Haber et al.
Background: The aim of this study was to find the best surface treatment for CAD/CAM provisional crowns allowing the optimal bond strength of metal brackets. ...
Shear Bond Strength and Color Stability of Novel Antibacterial Nanofilled Dental Adhesive Resins [0.03%]
新型抗菌纳米填充牙用粘接树脂的剪切粘结强度及色度稳定性
Qing Hong,Alexandra C Pierre-Bez,Matheus Kury et al.
Qing Hong et al.
The present study represents an effort to characterize the shear-bond strength (SBS) and color stability (CS) of these novel biomaterials.
Shear-bond strength of different Self-Etching adhesive systems to dentin with or without laser irradiation before photopolymerization (A comparative Study) [0.03%]
光聚合前后不同自酸蚀粘接系统与牙本质剪切粘结强度的比较研究中添加或不添加激光照射
Wiaam M O Al-Ashou,Rajaa Taher,Alaa H Ali
Wiaam M O Al-Ashou
This study aimed at comparing shear-bond strength (SBS) of different self-etching adhesive systems (Clearfil S3 Bond Plus, G-Premio BOND and IBond) to dentin without or with diode-laser irradiation before photo-polymerization and to determine the effect of storage and thermo-cycling on SBS of adhesive
Comparative Evaluation of Shear Bond Strength of Brackets Bonded with self Etch Primer/Adhesive and Conventional Etch/Primer and Adhesive System [0.03%]
自酸蚀粘结剂与传统酸蚀粘结系统正畸 brackets 粘接 shear bond strength 的比较研究
Debarshi Bhattacharjee,Kanchan Sharma,Rajalaxmi Sahu et al.
Debarshi Bhattacharjee et al.
Introduction: The shear bond strength obtained with an acid primer might not be clinically reliable. The present study evaluated the use of a new self-etch primer as compared with the conventional bonding procedure. The f...
Influence of TiO2 and ZrO2 Nanoparticles on Adhesive Bond Strength and Viscosity of Dentin Polymer: A Physical and Chemical Evaluation [0.03%]
TiO2和ZrO2纳米颗粒对牙本质粘结剂的粘接力和黏度的影响：一项物理化学评估研究
Samar Al-Saleh,Abdullah Alateeq,Abdulaziz H Alshaya et al.
Samar Al-Saleh et al.
The adhesives were characterized by analyzing their rheological properties, shear-bond strength (SBS), and interfacial failure types. Further, the resin-dentin interface was also analyzed via SEM.
An In vitro Study to Assess the Effectiveness of the Shear Bond Strength of Mineral Trioxide Aggregate with Different Adhesive Systems [0.03%]
不同粘结系统对矿化三氧化聚合物 shear bond strength 的影响的体外实验研究
Abdulelah Sameer Sindi
Abdulelah Sameer Sindi
Purpose of the study: Mineral trioxide aggregate (MTA) is a biocompatible material and has excellent sealing ability. It is proved and claimed that it provides double seal due to its physical sealing ability as well as ab...
耗时 0.09336 秒，为您在
48229835
条记录里面共找到 61 篇文章 [XML]