Impact of immediate versus delayed dentin sealing on adhesive luting effectiveness [0.03%]
即刻封闭与延迟封闭对树脂粘接系统效果的影响
Renato Quirino Ramos,Ben Mercelis,Mohammed H Ahmed et al.
Renato Quirino Ramos et al.
Objective: To evaluate the effect of immediate versus delayed dentin sealing (IDS/DDS) on the micro-tensile bond strength (µTBS) of CAD/CAM composite adhesively luted onto dentin. ...
Effects of implant abutment CAD/CAM design parameters on subgingival remnant cement [0.03%]
种植体愈合帽CAD/CAM设计参数对冠边缘位置及残留树脂粘接剂的影响研究
Fanghui Ji,Ji Hong Min,Oh Hwiseong et al.
Fanghui Ji et al.
Purpose: To investigate the remnant cement in the subgingival regions (RCS) of abutments fabricated with different CAD/CAM parameters, including margin curvature radius, convergence angle, top fillet radius, and subgingiv...
Aesthetic Preferences for Replacement of Missing Maxillary Lateral Incisors: A Comparison of Canine Substitution, Implants and Resin-Bonded Bridges Among Australian Dental Professionals and Laypeople [0.03%]
澳大利亚牙科从业人员和普通民众对上颌侧切牙缺失的美学修复方式的偏好比较：尖牙替代、种植或粘接固定义齿的对照研究
Jason Guo,John M Razza,Richard J H Lee et al.
Jason Guo et al.
Background: Aesthetic outcomes of treatment options for missing maxillary lateral incisors significantly influence patient satisfaction. This study compared aesthetic treatment outcome preferences for canine substitution,...
Effects of different energy levels of Er: YAG laser-assisted bleaching on teeth bleaching efficacy and immediate resin bonding: a study on safety and clinical applicability [0.03%]
不同能量水平的Er: YAG激光辅助漂白对牙齿美白效果及即时树脂粘接的影响：一项关于安全性和临床适用性的研究
Ruolin Cai,Yuwang Tu,Suli Xiao et al.
Ruolin Cai et al.
Purpose: The study aimed to evaluate the teeth bleaching effect of Er: YAG laser at different energy levels and its impact on immediate resin bonding shear strength. ...
Effect of low-fusing porcelain glaze as zirconia surface treatment on the adhesion of resin cement [0.03%]
低熔融陶瓷釉作为氧化锆表面处理对树脂粘接剂粘接力的影响
Hasan Skienhe,Ahmed Abdou,Jukka P Matinlinna et al.
Hasan Skienhe et al.
Background: This laboratory study aimed to investigate the influence of a novel surface treatment method, utilizing a low-fusing porcelain glaze layer, on pre-sintered zirconia and the adhesion with resin composite cement...
Effect of surface conditioning protocols on the repair bond strength of resin composite to CAD/CAM blocks: Bioactive-glass, silica-coated alumina, or aluminum oxide? [0.03%]
不同表面处理方法对生物活性玻璃、氧化铝和硅涂层氧化铝CAD/CAM修复体与树脂粘接强度的影响？
Büşra Karabulut Gençer,Ayşe Aslı Şenol,Ezgi Acar et al.
Büşra Karabulut Gençer et al.
This study evaluated the repair bond strengths of ceramic and hybrid ceramic CAD/CAM restorations following bioactive-glass, silica-coated alumina, and aluminum oxide surface treatments. Shear bond strength (SBS) tests, surface roughness, a...
Clinical Performance of Lithium Disilicate Ceramic Veneers Cemented With Light-Cured Resin Cements: An Observational Study [0.03%]
用光固化树脂粘接剂修复瓷 veneer 的临床表现：一项观察性研究
Nguyen Thi Minh Hien,Tran Hung Lam,Do Thi Thao et al.
Nguyen Thi Minh Hien et al.
Objective: This study aimed to evaluate and compare the clinical performance of ceramic veneers cemented with two different cements, Variolink Esthetic LC (Ivoclar, Schaan, Liechtenstein) and Vitique (DMG, Hamburg, German...
Three-year performance of inlay-retained or wing-retained zirconia resin-bonded fixed partial dentures - results from a randomized clinical pilot study [0.03%]
嵌体保持式和翼片保持式氧化锆树脂固定部分义齿的3年临床研究结果：随机临床试验初步报告
Wolfgang Bömicke,Friederike Rathmann,Peter Rammelsberg et al.
Wolfgang Bömicke et al.
Objective: The objective of this prospective clinical study was to compare the 3-year clinical outcome of 3-unit fixed-fixed zirconia resin-bonded fixed prostheses (RBFPDs) with two different retainer designs placed in th...
Effect of the contamination and cleaning methods on the tensile bond strength of the polyetheretherketone restorative material cemented with dual-cure resin cement [0.03%]
污染及清洁方法对双固化树脂粘接剂联合用于聚醚醚酮修复材料剪切抗压强度的影响
Iman Moheb Ibrahim,Ahmed Ezzat Sabet,Marwa Wahsh et al.
Iman Moheb Ibrahim et al.
Background: These days, computer-aided design/computer-aided manufacturing (CAD/CAM) resinbased materials are being used daily in clinical practice for restorations in prosthetic dentistry. In comparison with ceramic mate...
Durability of resin bonding to translucent zirconia materials: An in vitro study [0.03%]
一种树脂与透明氧化锆粘接的体外研究
Abdulaziz Samran,Shurouk Ali,Shadi El Bahra et al.
Abdulaziz Samran et al.
Statement of problem: How the yttria content (3Y-PSZ, 4Y-PSZ and 5Y-PSZ) affects the tensile bond strength of luting resin to translucent zirconia ceramics is unclear. ...
耗时 0.13966 秒，为您在
48229835
条记录里面共找到 2058 篇文章 [XML]